CASTOR (ROCKET STAGE)

The 'Castor' family of solid-fuel rocket stages and boosters were built by Thiokol and used on a variety of launch vehicles.^[1]

Contents

Versions

See also

References

Versions

; Castor 1:
The Castor 1 was first used for a successful suborbital launch of a Scout X-1
rocket on September 2, 1960.^[2]
It was long, in diameter, and had a burn time of 27 seconds. Castor 1 stages were also used as strap-on boosters for launch vehicles using Thor first stages, including the Delta-D. (A Delta-D was used in 1964 to launch Syncom-3, the first satellite placed in a geostationary orbit.) Castor 1 stages were used in 141 launch attempts of Scout and Delta rockets, only 2 of which were failures. They were also used on some thrust-assisted Thor-Agena launchers. The last launch using a Castor 1 was in 1971.^[3]
; Castor 2:
The Castor 2 was an upgraded version of the Castor 1. It was first used on a Scout in 1965, and continued to be used on Scouts until the last Scout launch, in 1994. Castor 2 stages were also used as the strap-on boosters for the Delta-E. It retained the same diameter as the Castor 1, and was from 5.96 m to 6.27 m in length.

'Castor 4:'

The Castor 4, along with its A and B variants, were expanded to 1.02 m in diameter. They were used on some Delta, Delta II, Atlas IIAS, and Athena launch vehicles.
; Castor 120:
The Castor 120 was first used as the first-stage motor of Lockheed Martin's Athena.^[4] After a test launch in August 1995, the first launch of a customer payload took place on August 22, 1997, when an Athena was used to launched the NASA Lewis satellite.^[5]

See also

★ Atlas II

★ Graphite-Epoxy Motor

★ Little Joe

★ Taurus rocket

★ Thrust Augmented Thor

References

1.
TSE - Castor

2.
TSE - Scout

3.
Castor 1

4.
Castor 120
5.
Athena