العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
EspañolCOOMBS TEST
'Coombs test' (also known as 'Coombs' test', 'antiglobulin test' or 'AGT') refers to two clinical blood tests used in hematology and immunology.
The two Coombs tests are:
★ 'Direct Coombs test' (also known as 'direct antiglobulin test' or 'DAT').
★ 'Indirect Coombs test' (also known as 'indirect antiglobulin test' or 'IAT').
The 'direct Coombs test' is used in the diagnosis of autoimmune diseases. It detects antibodies bound to the surface of red blood cells. The red blood cells (RBCs) are washed (removing the patient's own serum) and then incubated with antihuman globulin (also known as "Coombs reagent"). If this produces agglutination of the RBCs, the direct Coombs test is positive.
The 'indirect Coombs test' is used in prenatal testing of pregnant women, and in testing blood prior to a blood transfusion. It detects antibodies against RBCs that are present unbound in the patient's serum. In this case, serum is extracted from the blood, and the serum is incubated with RBCs of known antigenicity. If agglutination occurs, the indirect Coombs test is positive.[1]
The two Coombs tests are based on the fact that anti-human antibodies, which are produced by immunizing non-human species with human serum, will bind to human antibodies, commonly IgG or IgM. Animal anti-human antibodies will also bind to human antibodies that may be fixed onto antigens on the surface of red blood cells (also referred to as RBCs), and in the appropriate test tube conditions this can lead to agglutination of RBCs. The phenomenon of agglutination of RBCs is important here, because the resulting clumping of RBCs can be visualised; when clumping is seen the test is positive and when clumping is not seen the test is negative.
Common clinical uses of the Coombs test include the preparation of blood for transfusion in cross-matching, screening for atypical antibodies in the blood plasma of pregnant women as part of antenatal care, and detection of antibodies for the diagnosis of immune-mediated haemolytic anaemias.
Coombs tests are done on serum from venous blood samples which are taken from patients by venipuncture. The venous blood is taken to a laboratory (or blood bank), where trained scientific technical staff do the Coombs tests. The clinical significance of the result is assessed by the physician who requested the Coombs test, perhaps with assistance from a laboratory-based hematologist.
The direct Coombs test (also known as the 'direct antiglobulin test' or DAT) is used to detect if antibodies or complement system factors have bound to RBC surface antigens ''in vivo''. The DAT is not currently required for pre-transfusion testing but may be included by some laboratories.
The direct Coombs test is used clinically when immune-mediated hemolytic anemia (antibody-mediated destruction of RBCs) is suspected. A positive Coombs test indicates that an immune mechanism is attacking the patient's own RBC's. This mechanism could be autoimmunity, alloimmunity or a drug-induced immune-mediated mechanism.
★ Hemolytic disease of the newborn (also known as HDN or erythroblastosis fetalis)
★
★ Rhesus D hemolytic disease of the newborn (also known as Rh disease)
★
★ ABO hemolytic disease of the newborn (the indirect Coombs test may only be weakly positive)
★
★ Anti-Kell hemolytic disease of the newborn
★
★ Rhesus c hemolytic disease of the newborn
★
★ Other blood group incompatibility (RhC, Rhe, RhE, Kid, Duffy, MN, P and others)
★ Alloimmune hemolytic transfusion reactions
★ Warm antibody autoimmune hemolytic anemia
★
★ Idiopathic
★
★ Systemic lupus erythematosus
★
★ Evans' syndrome (antiplatelet antibodies and hemolytic antibodies)
★ Cold antibody autoimmune hemolytic anemia
★
★ Idiopathic cold hemagglutinin syndrome
★
★ Infectious mononucleosis
★
★ Paroxysmal cold hemoglobinuria (rare)
★ Methyldopa (IgG mediated type II hypersensitivity)
★ Penicillin (high dose)
★ Quinidine (IgM mediated activation of classical complement pathway and Membrane attack complex, MAC)
(A memory device to remember that the ''DAT'' tests the RBCs and is used to test infants for ''haemolytic disease of the newborn'' is:
'''R'h 'D'isease''; '''R''' = RBCs, '''D''' = DAT.)
The 'patient's' red blood cells (RBCs) are washed (removing the patient's own serum) and then incubated with antihuman globulin (also known as Coombs reagent). If immunoglobulin or complement factors have been fixed on to the RBC surface in-vivo, the antihuman globulin will agglutinate the RBCs and the direct Coombs test will be positive. (A visual representation of a positive direct Coombs test is shown in the upper half of the schematic).
The indirect Coombs test (also known as the 'indirect antiglobulin test' or IAT) is used to detect in-vitro antibody-antigen reactions. It is used to detect very low concentrations of antibodies present in a patient's plasma/serum prior to a blood transfusion. In antenatal care, the IAT is used to screen pregnant women for antibodies that may cause hemolytic disease of the newborn. The IAT can also be used for compatibility testing, antibody identification, RBC phenotyping, and titration studies.
Main articles: blood transfusion
The indirect Coombs test is used to screen for antibodies in the preparation of blood for blood transfusion. The donor's and recipient's blood must be ABO and Rhesus D compatible. Donor blood for transfusion is also screened for infections in separate processes.
★ Antibody screening
A blood sample from the recipient and a blood sample from every unit of donor blood are screened for antibodies with the indirect Coombs test. Each sample is incubated against a wide range of RBCs that together exhibit a full range of surface antigens (ie blood types).
★ Cross matching
Main articles: cross-matching
The indirect Coombs test is used to test a sample of the recipient's serum against a sample of the blood donor's RBCs. This is sometimes called cross-matching blood.
The indirect Coombs test is used to screen pregnant women for IgG antibodies that are likely to pass through the placenta into the foetal blood and cause haemolytic disease of the newborn.
The IAT is a two-stage test. (A cross match is shown visually in the lower half of the schematic as an example of an indirect Coombs test).
Washed test red blood cells (RBCs) are incubated with a test serum. If the serum contains antibodies to antigens on the RBC surface, the antibodies will bind onto the surface of the RBCs.
The RBCs are washed three or four times with isotonic saline and then incubated with antihuman globulin. If antibodies have bound to RBC surface antigens in the first stage, RBCs will agglutinate when incubated with the antihuman globulin (also known Coombs reagent) in this stage, and the indirect Coombs test will be positive.
By diluting a serum containing antibodies the quantity of the antibody in the serum can be gauged. This is done by using doubling dilutions of the serum and finding the maximum dilution of test serum that is able to produce agglutination of relevant RBCs.
Coombs reagent (also known as 'Coombs antiglobulin' or 'antihuman globulin') is used in both the direct Coombs test and the indirect Coombs test. Coombs reagent is antihuman globulin. It is made by injecting human globulin into animals. Coombs reagent contains animal antibodies specific for human immunoglobulins and human complement system factors. More specific Coombs reagents or monoclonal antibodies can be used.
Both IgM and IgG antibodies react strongly with their antigens. IgG antibodies are most reactive at 37° C. IgM antibodies are easily detected in saline at room temperature as IgM antibodies are able to bridge between RBC’s owing to their large size, efficiently creating what is seen as agglutination. IgG antibodies are smaller and require assistance to bridge well enough to form a visual agglutination reaction. Reagents used to enhance IgG detection are referred to as potentiators. RBCs have a net negative charge called zeta potential which causes them to have a natural repulsion for one another. Potentiators reduce the zeta potential of RBC membranes. Common potentiators include low ionic strength solution (LISS), albumin, polyethylene glycol (PEG), and proteolytic enzymes.
The Coombs test was first described in 1945 by Cambridge immunologists Robin Coombs (after whom it is named), Arthur Mourant and Rob Race.[2] Historically, it was done in test tubes. Today, it is commonly done using microarray and gel technology.
1. F. Rosen and R. Geha, ''Case Studies in Immunology, 4th ed.'', Garland Science, p.173.
2. Coombs RRA, Mourant AE, Race RR. ''A new test for the detection of weak and "incomplete" Rh agglutinins.'' Brit J Exp Path 1945;26:255-66.
★ Coombs testing - Institute for Transfusion Medicine.
★ Coombs’ test - direct - Medlineplus.org.
★ Coombs’ test - indirect - Medlineplus.org.
★ Acute Anemia - emedicine.com
★ Drugs that cause haemolytic anemia - Merck Manual.
The two Coombs tests are:
★ 'Direct Coombs test' (also known as 'direct antiglobulin test' or 'DAT').
★ 'Indirect Coombs test' (also known as 'indirect antiglobulin test' or 'IAT').
The 'direct Coombs test' is used in the diagnosis of autoimmune diseases. It detects antibodies bound to the surface of red blood cells. The red blood cells (RBCs) are washed (removing the patient's own serum) and then incubated with antihuman globulin (also known as "Coombs reagent"). If this produces agglutination of the RBCs, the direct Coombs test is positive.
The 'indirect Coombs test' is used in prenatal testing of pregnant women, and in testing blood prior to a blood transfusion. It detects antibodies against RBCs that are present unbound in the patient's serum. In this case, serum is extracted from the blood, and the serum is incubated with RBCs of known antigenicity. If agglutination occurs, the indirect Coombs test is positive.[1]
Mechanism
The two Coombs tests are based on the fact that anti-human antibodies, which are produced by immunizing non-human species with human serum, will bind to human antibodies, commonly IgG or IgM. Animal anti-human antibodies will also bind to human antibodies that may be fixed onto antigens on the surface of red blood cells (also referred to as RBCs), and in the appropriate test tube conditions this can lead to agglutination of RBCs. The phenomenon of agglutination of RBCs is important here, because the resulting clumping of RBCs can be visualised; when clumping is seen the test is positive and when clumping is not seen the test is negative.
Common clinical uses of the Coombs test include the preparation of blood for transfusion in cross-matching, screening for atypical antibodies in the blood plasma of pregnant women as part of antenatal care, and detection of antibodies for the diagnosis of immune-mediated haemolytic anaemias.
Coombs tests are done on serum from venous blood samples which are taken from patients by venipuncture. The venous blood is taken to a laboratory (or blood bank), where trained scientific technical staff do the Coombs tests. The clinical significance of the result is assessed by the physician who requested the Coombs test, perhaps with assistance from a laboratory-based hematologist.
Schematic showing the 'direct and indirect Coombs tests'.
Direct Coombs Test
The direct Coombs test (also known as the 'direct antiglobulin test' or DAT) is used to detect if antibodies or complement system factors have bound to RBC surface antigens ''in vivo''. The DAT is not currently required for pre-transfusion testing but may be included by some laboratories.
Examples of diseases that give a positive direct Coombs test
The direct Coombs test is used clinically when immune-mediated hemolytic anemia (antibody-mediated destruction of RBCs) is suspected. A positive Coombs test indicates that an immune mechanism is attacking the patient's own RBC's. This mechanism could be autoimmunity, alloimmunity or a drug-induced immune-mediated mechanism.
Examples of alloimmune hemolysis
★ Hemolytic disease of the newborn (also known as HDN or erythroblastosis fetalis)
★
★ Rhesus D hemolytic disease of the newborn (also known as Rh disease)
★
★ ABO hemolytic disease of the newborn (the indirect Coombs test may only be weakly positive)
★
★ Anti-Kell hemolytic disease of the newborn
★
★ Rhesus c hemolytic disease of the newborn
★
★ Other blood group incompatibility (RhC, Rhe, RhE, Kid, Duffy, MN, P and others)
★ Alloimmune hemolytic transfusion reactions
Examples of autoimmune hemolysis
★ Warm antibody autoimmune hemolytic anemia
★
★ Idiopathic
★
★ Systemic lupus erythematosus
★
★ Evans' syndrome (antiplatelet antibodies and hemolytic antibodies)
★ Cold antibody autoimmune hemolytic anemia
★
★ Idiopathic cold hemagglutinin syndrome
★
★ Infectious mononucleosis
★
★ Paroxysmal cold hemoglobinuria (rare)
Drug-induced immune-mediated haemolysis
★ Methyldopa (IgG mediated type II hypersensitivity)
★ Penicillin (high dose)
★ Quinidine (IgM mediated activation of classical complement pathway and Membrane attack complex, MAC)
(A memory device to remember that the ''DAT'' tests the RBCs and is used to test infants for ''haemolytic disease of the newborn'' is:
'''R'h 'D'isease''; '''R''' = RBCs, '''D''' = DAT.)
Laboratory method
The 'patient's' red blood cells (RBCs) are washed (removing the patient's own serum) and then incubated with antihuman globulin (also known as Coombs reagent). If immunoglobulin or complement factors have been fixed on to the RBC surface in-vivo, the antihuman globulin will agglutinate the RBCs and the direct Coombs test will be positive. (A visual representation of a positive direct Coombs test is shown in the upper half of the schematic).
Indirect Coombs test
The indirect Coombs test (also known as the 'indirect antiglobulin test' or IAT) is used to detect in-vitro antibody-antigen reactions. It is used to detect very low concentrations of antibodies present in a patient's plasma/serum prior to a blood transfusion. In antenatal care, the IAT is used to screen pregnant women for antibodies that may cause hemolytic disease of the newborn. The IAT can also be used for compatibility testing, antibody identification, RBC phenotyping, and titration studies.
Examples of clinical uses of the indirect Coombs test
Blood transfusion preparation
Main articles: blood transfusion
The indirect Coombs test is used to screen for antibodies in the preparation of blood for blood transfusion. The donor's and recipient's blood must be ABO and Rhesus D compatible. Donor blood for transfusion is also screened for infections in separate processes.
★ Antibody screening
A blood sample from the recipient and a blood sample from every unit of donor blood are screened for antibodies with the indirect Coombs test. Each sample is incubated against a wide range of RBCs that together exhibit a full range of surface antigens (ie blood types).
★ Cross matching
Main articles: cross-matching
The indirect Coombs test is used to test a sample of the recipient's serum against a sample of the blood donor's RBCs. This is sometimes called cross-matching blood.
Antenatal antibody screening
The indirect Coombs test is used to screen pregnant women for IgG antibodies that are likely to pass through the placenta into the foetal blood and cause haemolytic disease of the newborn.
Laboratory method
The IAT is a two-stage test. (A cross match is shown visually in the lower half of the schematic as an example of an indirect Coombs test).
First stage
Washed test red blood cells (RBCs) are incubated with a test serum. If the serum contains antibodies to antigens on the RBC surface, the antibodies will bind onto the surface of the RBCs.
Second stage
The RBCs are washed three or four times with isotonic saline and then incubated with antihuman globulin. If antibodies have bound to RBC surface antigens in the first stage, RBCs will agglutinate when incubated with the antihuman globulin (also known Coombs reagent) in this stage, and the indirect Coombs test will be positive.
Titrations
By diluting a serum containing antibodies the quantity of the antibody in the serum can be gauged. This is done by using doubling dilutions of the serum and finding the maximum dilution of test serum that is able to produce agglutination of relevant RBCs.
Coombs reagent
Coombs reagent (also known as 'Coombs antiglobulin' or 'antihuman globulin') is used in both the direct Coombs test and the indirect Coombs test. Coombs reagent is antihuman globulin. It is made by injecting human globulin into animals. Coombs reagent contains animal antibodies specific for human immunoglobulins and human complement system factors. More specific Coombs reagents or monoclonal antibodies can be used.
Enhancement Media
Both IgM and IgG antibodies react strongly with their antigens. IgG antibodies are most reactive at 37° C. IgM antibodies are easily detected in saline at room temperature as IgM antibodies are able to bridge between RBC’s owing to their large size, efficiently creating what is seen as agglutination. IgG antibodies are smaller and require assistance to bridge well enough to form a visual agglutination reaction. Reagents used to enhance IgG detection are referred to as potentiators. RBCs have a net negative charge called zeta potential which causes them to have a natural repulsion for one another. Potentiators reduce the zeta potential of RBC membranes. Common potentiators include low ionic strength solution (LISS), albumin, polyethylene glycol (PEG), and proteolytic enzymes.
History of the Coombs test
The Coombs test was first described in 1945 by Cambridge immunologists Robin Coombs (after whom it is named), Arthur Mourant and Rob Race.[2] Historically, it was done in test tubes. Today, it is commonly done using microarray and gel technology.
References
1. F. Rosen and R. Geha, ''Case Studies in Immunology, 4th ed.'', Garland Science, p.173.
2. Coombs RRA, Mourant AE, Race RR. ''A new test for the detection of weak and "incomplete" Rh agglutinins.'' Brit J Exp Path 1945;26:255-66.
External links
★ Coombs testing - Institute for Transfusion Medicine.
★ Coombs’ test - direct - Medlineplus.org.
★ Coombs’ test - indirect - Medlineplus.org.
★ Acute Anemia - emedicine.com
★ Drugs that cause haemolytic anemia - Merck Manual.
This article provided by Wikipedia. To edit the contents of this article, click here for original source.
psst.. try this: add to faves
