Discover

(Redirected from DX Camera Auto-Sensing Code)

'DX' (Digital indeX) encoding is an ANSI and I3A standard for marking 135 and APS photographic film and film cartridges. It has several parts, a latent image DX film edge barcode on the film below the sprocket holes, a code on the cartridge used by automatic cameras, and a barcode on the cartridge read by photo-finishing machines.

Contents

DX cartridge barcode

DX film edge barcode

DX Camera Auto Sensing

Electrical contacts

Reading DX codes

See also

DX cartridge barcode

Next to the film exit lip is an Interleaved 2 of 5 barcode and a printed number which represent the I3A assigned DX number, the number of exposures and a proprietary manufacturer's code. The DX number identifies the manufacturer, film type, and by inference, the necessary developing process type. This is used by automatic photo-finishing machines to correctly process the exposed film. (Kodak US patent 4965628)

DX film edge barcode

Below the sprockets under each frame of 135 film is the DX film edge barcode. The barcode is invisible until the film has been developed. It is optically imprinted as a latent image during manufacturing. It is chiefly used by photo finishers to identify and align each frame for printing. (Kodak US patent 4965628)

DX Camera Auto Sensing

The outside of film cartridges are marked with a DX Camera Auto Sensing code readable by many cameras. Cameras can then automatically determine the film speed, number of exposures and exposure tolerance. The first 35mm camera to use the technology was the Konica TC-X, which was introduced in 1985.
The DX Camera Auto Sensing code takes the form of a grid of contact points on the side of the metal cartridge surface that are either conductive or non-conductive. Electrical contacts in the camera read the bit pattern. Most cameras read only part of the code; typically, only the film speed is read, and some cameras aimed at the consumer market only read enough bits to tell apart the most common film speeds. For example 100, 200, 400, and 800 can be detected by reading only S1 and S2 and ground.

Electrical contacts

On 35mm film cartridges there are two rows of six rectangular areas. The two left-most areas (with the spool post on the left) are both common (ground) and are thus always bare metal. The remaining 5 bits in the top row represent 32 possible film speeds. But only the 24 speeds representing the 1/3 stops from ISO 25/15° to 5000/38° are used. The codes are not in strict binary order.
In the second row, the first 3 bits represent 8 possible film lengths, although in practice only 12, 20, 24 and 36 exposures are encoded. The remaining 2 bits of the second row give 4 ranges of exposure tolerance, or latitude.
Diagramatically (with spool post to the left):

G	S1	S2	S3	S4	S5
G	L1	L2	L3	T1	T2

Where 'G' are the two common-ground contacts, 'S' is the film speed, 'L' the film length, and 'T' the exposure tolerance.

Reading DX codes

'Speed'

ISO speed	1st row DX contacts
25/15°
32/16°
40/17°
50/18°
64/19°
80/20°
100/21°
125/22°
160/23°
200/24°
250/25°
320/26°
400/27°
500/28°
640/29°
800/30°
1000/31°
1250/32°
1600/33°
2000/34°
2500/35°
3200/36°
4000/37°
5000/38°

'Film length'

Exposures	2nd row DX contacts
''other''
12
20
24
36
48
60
72

'Exposure tolerance'

Exposure tolerance (in f-stops)	2nd row DX contacts
±½
±1
+2 -1
+3 -1

See also

★ DX number

★ DX film edge barcode