العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
EspañolDISK STORAGE
'Disk storage' is a general category of a computer storage mechanisms, in which data is recorded on planar, round and rotating surfaces (''disks'', ''discs'', or ''platters''). A 'disk drive' is a peripheral device used to read from and write to a disk. Main implementations are hard disks, floppy disks and optical discs. Nowadays the term ''disk storage'' almost exclusively refers to hard disk storage.
In the 1950s and the early 1960s single data bits were stored as magnetic charges in a magnetic core memory.
Then the scientists at IBM in San Jose, California created a rotating drum that was coated in a magnetically polarizable film that could be used to store data by changing and sensing magnetic polarization. The drum was later superseded by disks, because of their lower mass and inertia. Reynold Johnson, an inventor who worked for IBM for many years, is said to be the "father" of the disk drive.
The random-access, low-density storage of disks was developed to complement
the already used sequential-access high-density storage provided by magnetic tape. Vigorous innovation in disk storage technology, coupled with less vigorous innovation in tape storage,
has reduced the density and cost per bit gap between disk and tape, reducing the importance of
tape as a complement to disk.
In musical and audio data storage, the first devices were also drum shaped, called phonograph cylinders, which were popularized by Thomas Edison. In the 1910s these were replaced as the dominant medium of sound recording by analogue disc records, commonly called ''gramophone records'' (in British English) or ''phonograph records'' (in American English). From the 1950s through the 1980s, audio recordings were also done on magnetic tape media of several types, although the vinyl record remained the most popular medium for home use. These were mostly replaced by compact disc technology, where the data is recorded in a digital format as optical information. This compact disc technology has been widely accepted, and data storage, using writable compact disks or CD-R devices is very common.
In disk storage, there are the two primary access methods. Block storage (or ''raw disk storage'') means that the disk is divided into blocks which are addressed by number, like on a magnetic tape. File storage contains an abstraction of files and directories which can be addressed by name. Another access method, content-addressable storage (CAS) uses a hashing algorithm to refer to pieces of data.
★ Rotation - how the disks spin. Two techniques are common:
★
★ Constant angular velocity (CAV) keeps the disk spinning at a fixed rate, measured in revolutions per minute (RPM). This means the heads cover more distance per unit of time on the outer tracks than on the inner tracks. This method is typical with computer hard drives.
★
★ Constant linear velocity (CLV) keeps the distance covered by the heads per unit time fixed. Thus the disk has to slow down as the arm moves to the outer tracks.
★ Sector - an area of disk enclosed within a given central angle (a pie piece)
★ Platter - an individual disk (since confusingly, what is now commonly called a single hard disk is in fact a set of disks)
★ Head - the device that reads and writes the information - magnetic or optical - on the disk surface.
★ Arm - the mechanical assembly that supports the head as it moves in and out.
★ Seek time - average time needed to move the head to a new position.
★ Rotational delay - average time, once the arm is on the right track, before a head is over a desired sector.
★ Compact disc
★ Early IBM disk storage
★ Floppy disk
★ Hard disk
★ Fragmentation (computer)
★ Solid state disk
★ More Bits in Pits - article by JR Minkel
| Contents |
| History |
| Audio recordings |
| Access methods |
| Basic terminology |
| See also |
| External links |
History
In the 1950s and the early 1960s single data bits were stored as magnetic charges in a magnetic core memory.
Then the scientists at IBM in San Jose, California created a rotating drum that was coated in a magnetically polarizable film that could be used to store data by changing and sensing magnetic polarization. The drum was later superseded by disks, because of their lower mass and inertia. Reynold Johnson, an inventor who worked for IBM for many years, is said to be the "father" of the disk drive.
The random-access, low-density storage of disks was developed to complement
the already used sequential-access high-density storage provided by magnetic tape. Vigorous innovation in disk storage technology, coupled with less vigorous innovation in tape storage,
has reduced the density and cost per bit gap between disk and tape, reducing the importance of
tape as a complement to disk.
Audio recordings
In musical and audio data storage, the first devices were also drum shaped, called phonograph cylinders, which were popularized by Thomas Edison. In the 1910s these were replaced as the dominant medium of sound recording by analogue disc records, commonly called ''gramophone records'' (in British English) or ''phonograph records'' (in American English). From the 1950s through the 1980s, audio recordings were also done on magnetic tape media of several types, although the vinyl record remained the most popular medium for home use. These were mostly replaced by compact disc technology, where the data is recorded in a digital format as optical information. This compact disc technology has been widely accepted, and data storage, using writable compact disks or CD-R devices is very common.
Access methods
In disk storage, there are the two primary access methods. Block storage (or ''raw disk storage'') means that the disk is divided into blocks which are addressed by number, like on a magnetic tape. File storage contains an abstraction of files and directories which can be addressed by name. Another access method, content-addressable storage (CAS) uses a hashing algorithm to refer to pieces of data.
Basic terminology
★ Rotation - how the disks spin. Two techniques are common:
★
★ Constant angular velocity (CAV) keeps the disk spinning at a fixed rate, measured in revolutions per minute (RPM). This means the heads cover more distance per unit of time on the outer tracks than on the inner tracks. This method is typical with computer hard drives.
★
★ Constant linear velocity (CLV) keeps the distance covered by the heads per unit time fixed. Thus the disk has to slow down as the arm moves to the outer tracks.
★ Sector - an area of disk enclosed within a given central angle (a pie piece)
★ Platter - an individual disk (since confusingly, what is now commonly called a single hard disk is in fact a set of disks)
★ Head - the device that reads and writes the information - magnetic or optical - on the disk surface.
★ Arm - the mechanical assembly that supports the head as it moves in and out.
★ Seek time - average time needed to move the head to a new position.
★ Rotational delay - average time, once the arm is on the right track, before a head is over a desired sector.
See also
★ Compact disc
★ Early IBM disk storage
★ Floppy disk
★ Hard disk
★ Fragmentation (computer)
★ Solid state disk
External links
★ More Bits in Pits - article by JR Minkel
This article provided by Wikipedia. To edit the contents of this article, click here for original source.
psst.. try this: add to faves
