Discover

(Redirected from List of Formula One engines)

Since its inception in 1947, 'Formula One' has used a variety of engine regulations. The origin of the name Formula comes from the use of a maximum engine capacity and single weight regulation. "Formulas" limiting engine capacity had been used in Grand Prix racing on a regular basis since after World War I. The engine formulae are divided according to era.

Contents

Operation

History

1947–1953

1954–1960

1961–1965

1966–1986

1987–1988

1989–1994

1995–2004

2005

2006

2007–2008

Future engines

References

External links

Operation

Formula One currently uses four-stroke V8, naturally-aspirated reciprocating engines. They typically produce 224 kilowatts (300 bhp, 304 PS) per litre of displacement, far higher than most internal combustion engines. For comparison, the naturally-aspirated piston engine production car with the most specific power is the Honda S2000 engine with 92 kW (123 bhp, 125 PS) per litre.
The power a Formula One engine produces is generated by operating at a very high rotational speed, up to 20,000 revolutions per minute (RPM). This contrasts with road car engines of a similar size which operate safely at typically less than 7,000 RPM. However, the torque (turning force at a given speed) of a Formula One engine is not much higher than a conventional petrol engine. For example, the 2006 2.4 litre Toyota RVX-06 V8 engine produces 552 kW (740 bhp, 751 PS) at 19,000 RPM and outputs 274 Nm of torque giving the engine a 14.3 bar mean effective pressure. This is comparable with the 14.3 bar maximum MEP of the 2003 BMW E46 M3 CSL, the best production car in this respect.
Consequently, high power is obtained by making an engine turn faster, a goal sought ever since research into performance engines began. The basic configuration of a naturally-aspirated Formula One engine has not been greatly modified since the 1967 Cosworth DFV and the mean effective pressure has stayed at around 14 bar MEP.^[1] Until the mid-1980s Formula One engines were limited to around 12,000 RPM due to the traditional metal valve springs used inside the engine to close the valves. The speed required to operate the engine valves at a higher RPM is much greater than the metal valve springs can handle and they were replaced by pneumatic valve springs introduced by Renault. Since the 1990s all Formula One engine manufacturers now use pneumatic valve springs with the pressurised air allowing engines to reach speeds nearly 20,000 RPM.
The bore is the diameter of the cylinder hole in the engine block for the piston and the stroke is the distance the piston travels in one revolution. A shorter stroke enables the engine to produce a higher rotating speed at a constant mean piston speed but also increases the speed at which the piston must travel in each revolution. Shortening the stroke however requires enlarging the bore to produce a Formula One engines 2.4 litre displacement resulting in a less efficient combustion chamber. The stroke of a Formula One engine is approximately 40 mm, less than half as long as the bore is wide (98 mm) producing an "over-square" configuration.
A 2.4 litre Formula One engine at 19,000 RPM have a 25 m/s mean piston speed (40mm
★ 2
★ 19k rpm/60), the same value than the previously mentioned Honda S2000 engine (84mm
★ 2
★ 8.9k rpm/60). This value is typically limited by increasing intake port velocities and frictional losses, but is attained by commercial vehicle engines, like the Honda S2000, BMW E46 M3's S54B32 with 24.5m/s as far back as 2001, the Audi RS4 with 24.2 m/s or the Yamaha YZF-R6 motorcycle with 23 m/s.
A Formula One engines high RPM output has been made possible mainly due to advances in metallurgy and design allowing lighter pistons and connecting rods to withstand the accelerations necessary to attain such high speeds. At each revolution, the piston goes from a null speed to almost two times the mean speed (approx. 40 m/s) then back to zero, and then another similar cycle to terminate the circle. Maximum piston acceleration occur at TDC and is in the area of 95,000 m/s², about 10,000 times standard gravity.

History

Formula One engines have come through a variety of regulations, manufacturers and configurations through the years.^[2]

1947–1953

This era used pre-war voiturette engine regulations, with 4.5 L atmospheric and 1.5 L supercharged engines. Formula 2 cars were allowed, and the World Championship was run under F2 rules in 1952 and 1953, but F1 races were still held in those years. The Indianapolis 500 used pre-war Grand Prix regulations, with 4.5 L atmospheric and 3.0 L supercharged engines. The power range was up to 425 hp.

★ Alta inline-4 1.5 L Compressor

★ Alfa Romeo inline-8 1.5 L Compressor

★ Bristol inline-6 2.0 L

★ BRM V16 1.5 L

★ ERA inline-6 1.5 L Compressor

★ Ferrari inline-4 2.0 L (F2), V12 1.5 L Compressor, V12 2.0 L (F2) and V12 4.5 L

★ Lea-Francis inline-4 2.0 L (F2)

★ Maserati inline-4 1.5 L Compressor and inline-6 2.0 L (F2)

★ Simca-Gordini inline-4 1.5 L Compressor

★ Talbot-Lago inline-6 4.5 L

1954–1960

Engine size was reduced for 2.5 L. 750 cc supercharged cars were allowed but no constructor built one for the World Championship. The Indianapolis 500 continued to use old pre-war regulations. The power range was up to 290 hp.

★ Alta inline-4 2.5 L

★ BRM inline-4 2.5 L

★ Coventry Climax inline-4 2.0 L and inline-4 2.5 L

★ Ferrari inline-4 2.5 L and V6 2.5 L

★ Lancia V8 2.5 L

★ Maserati inline-6 2.5 L and V12 2.5 L

★ Mercedes double-inline-4 2.5 L

★ Vanwall inline-4 2.5 L

1961–1965

Introduced in 1961 amidst some criticism, the new reduced engine 1.5 L formula took control of F1 just as every team and manufacturer switched from front to mid-engined cars. Although these were initially underpowered, five years later average power had increased by nearly 50%. Lap times were better than in 1960 anyway. The old 2.5 L formula had been retained for International Formula racing, but this didn't achieve much success until the introduction of the Tasman Series in Australia and New Zealand during the winter season, leaving the 1.5 L cars as the fastest single seaters in Europe during this time. The power range was between 150 and 225 hp.

★ ATS V8 1.5 L

★ BRM V8 1.5 L

★ Coventry Climax inline-4 1.5 L, V8 1.5 L and Flat-16 1.5 L (never raced)

★ Ferrari V6 1.5 L, V8 1.5 L and Flat-12 1.5 L

★ Honda V12 1.5 L aircooled

★ Porsche Flat-4 1.5 L aircooled and Flat-8 1.5 L aircooled

1966–1986

In 1966, with sports cars capable of outrunning Formula 1 cars thanks to much larger and more powerful engines, the FIA increased engine capacity to 3.0 L atmospheric and 1.5 L supercharged engines. Although a few manufacturers had been clamoring for bigger engines, the transition wasn't smooth and 1966 was a transitional year. The appearance of the standard-produced Cosworth DFV in 1967 made it possible for any small manufacturer to join the series with a home-built tub. Supercharging was allowed for the first time since 1960, but it wasn't until 1977 that it became viable, when Renault debuted their new Gordini V6 Turbo. In 1969, Lotus made a few unsuccessful experiments with a Pratt & Whitney turbine fitted to chassis which had also 4WD. The power range was between 390 to 500 hp, turbos 500 to 900 in race, in qualifiying up to 1500 hp.

★ Alfa Romeo V8 1.5 L Turbo, V8 3.0 L, Flat-12 3.0 L and V12 3.0 L

★ BMW inline-4 1.5 L Turbo

★ BRM H16 3.0 L and V12 3.0 L

★ Ferrari V6 1.5 L Turbo, V12 3.0 L and Flat-12 3.0 L

★ Ford V6 1.5 L Turbo

★ Ford Cosworth DFV V8 3.0 L and DFY V8 3.0 L

★ Hart inline-4 1.5 L Turbo

★ Honda V6 1.5 L Turbo

★ Maserati V12 3.0 L

★ Matra V12 3.0 L

★ Repco V8 3.0 L

★ Renault Gordini V8 (never raced) 3.0 L and Gordini V6 1.5 L Turbo

★ TAG-Porsche V6 1.5 L Turbo

★ Tecno Flat-12 3.0 L

★ Weslake V12 3.0 L

★ Zakspeed inline-4 1.5 L Turbo

1987–1988

Following the turbo domination, forced induction was allowed for two seasons before its eventual ban. The FIA regulations limited boost pressure, to 4 bars in qualification in 1987 for 1.5 L turbo; and allowed a bigger 3.5 L formula. These seasons were still dominated by turbocharged engines, the Honda RA167E V6 supplying Nelson Piquet winning the 1987 Formula One season on a Williams also winning the constructors championship, followed by TAG-Porsche P01 V6 in McLaren then Honda again with the previous RA166E for Lotus then Ferrari's own 033D V6.
The rest of the grid was powered by the Ford GBA V6 turbo with Benetton, then the only naturally aspirated engine, the DFV-derived Ford Cosworth DFZ 3.5 L V8 outputting 575hp in Tyrrell, Lola, AGF, March and Coloni.^[3] The BMW M12/13 inline four was found in Brabhams and under the Megatron brand in Arrows and one Ligier, producing 900bhp at 3,8 bars in race.^[4] Zakspeed was building its own turbo inline four, Alfa Romeo was powering the other Ligier with the 415T inline four and the 890T V8 in Osella, and Minardi was powered by a Motori Moderni V6.
The 1988 Formula One season was again dominated by turbocharged engines limited to 2.5 bar and Honda with its RA168E turbo V6 producing 685hp at 12500rpm in qualification, this time with Mclaren drivers Ayrton Senna and Alain Prost winning all the grands prix except one won by Ferrari with its 033E V6. Just behind, Ford introduced its DFR 3.5 L V8 producing 585hp at 11000rpm for Benetton, and the (BMW) Megatron M12/13 was still powering Arrows ahead of the Lotus-Honda. Judd introduced its CV 3.5 L V8 for March, Williams and Ligier, and the rest of the grid was mainly using previous year's Ford Cosworth DFZ except Zakspeed and the Alfa-Romeo for Osella.

1989–1994

Turbochargers were banned from the 1989 Formula One season, leaving only a naturally aspirated 3.5 L formula. Honda was still dominant with their RA109E 72° V10 giving 675hp at 13000rpm on McLaren cars, enabling Prost to win the championship in front of his team-mate Senna. Behind were the Renault RS01 powered Williams, a 67° V10 giving 650hp at 14300rpm max and Ferrari which was the only team to win a race excepted McLaren with its 035/5 65° V12 giving 660hp at 13000rpm. Behind, the grid was powered mainly by Ford Cosworth DFR V8 giving 595hp at 10750rpm except for a few 600hp Judd CV V8 in Lotus, Brabham and EuroBrun cars, and two oddballs : the Lamborghini 3512 80° V12 powering Lola and the Yamaha OX88 75° V8 in Zakspeed cars. Ford started to try its new design, the 75° V8 HBA 1 with Benetton.
The 1990 Formula One season was again dominated by Honda in McLarens with the 690hp at 13000rpm RA100E powering Ayrton Senna and Gerhard Berger ahead of the 680hp at 12750rpm Ferrari Tipo 036 of Alain Prost and Nigel Mansell. Behind them the Ford HBA4 for Benetton and Renault RS2 for Williams with 660hp at 12800rpm were leading the pack powered by Ford DFR and Judd CV engines. The exceptions were the better Lamborghini 3512 in Lola and Lotus, and the new Judd EV 76° V8 giving 640hp at 12500rpm in Leyton House and Brabham cars. The two new contenders were the Life which built for themselves a F35 W12 with three four cylinders banks at 60°, and Subaru giving Coloni a 1235 flat 12 from Motori Moderni
Honda was still leading the 1991 Formula One season in Senna's McLaren with a 710hp at 13000rpm 60° V12 RA121E, just ahead of the Renault RS3 powered Williams benefiting from 700hp at 12500rpm. Ferrari was behind with its Tipo 037, a new 65° V12 giving 710hp at 13800rpm also powering Minardi, just ahead the Ford HBA4/5/6 in Benetton and Jordan cars. Behind, Tyrrell was using the previous Honda RA109E, Judd introduced its new GV with Dallara leaving the previous EV to Lotus, Yamaha were giving its 660hp OX99 70° V12 to Brabham, Lamborghini engines were used by Modena and Ligier. Ilmor introduced its LH10, a 680hp at 13000rpm V10 which eventually became the Mercedes with Leyton House and Porsche sourced a little successful 3512 V12 to Footwork Arrows; the rest of the field was Ford DFR powered.

1995–2004

3.0 L formula, the power range was between 650 and 950 hp.

2005

3.0 L V10, engine may have no more than 5 valves per cylinder.^[5]
It may be noted that Honda's Suzuka Spec engine may have produced upwards of 980 BHP during this year.

2006

For 2006, the engines must be 90° V8 of 2.4 litres maximum capacity with a 98 mm maximum circular bore, which imply a 39.7 mm minimum stroke. They have two circular inlet and exhaust valves per cylinder, are normally-aspirated and must have a 95 kg minimum weight. Previous year's engines with a rev-limiter are permitted for 2006 and 2007 for teams who can't obtain a competitive V8.
Pre-cooling air before it enters the cylinders, injection of any substance other than air and fuel into the cylinders, variable-geometry intake and exhaust systems, variable valve timing are forbidden. Each cylinder can have only one fuel injector and a single plug spark ignition. Separate starting devices are used to start engines in the pits and on the grid.
The crankcase and cylinder block must be made of cast or wrought aluminium alloys. The crankshaft and camshafts must be made from an iron alloy, pistons from an aluminium alloy and valves from alloys based on iron, nickel, cobalt or titanium. The complete rules are available from the FIA Formula One world championship regulations.^[6]
This is leading to a power reduction of around 20% from the three litre engines, However in many cases, performance of the car has been improved. In 2006 Toyota F1 announced an approximate 740 hp output at 19000 rpm for its new RVX-06 engine, ^[7] but real figures are of course difficult to obtain.

2007–2008

For 2007 the engine specification has been frozen to keep development costs down. The engines which were used in the 2006 Japanese Grand Prix, will be used for the 2007 and 2008 seasons and they will be limited to 19000 RPM.

Future engines

While there is currently an engine freeze that effectively bans constructors from developing new engines, there is much speculation on the engine regulations once the freeze is lifted. The FIA and FOM have made statements indicating that both want F1 to be more environmentally friendly and at the same time, be on the front line of future engine development. There is also speculation of a return to turbocharged engines based on comments made by the FIA on finding ways to effectively harness waste heat energy from the cars exhausts.
The FIA could introduce 2.2 litre turbocharged V6 engines running on biodiesel in 2011, restricted to 10,000rpm and capable of enduring five Grand Prix, to attract generalist automakers with resembling products.^[8] This could come along the introduction of traction control, four-wheel drive, power boost devices and identical bodywork to save on aerodynamic competition lacking real-life applications.

References

1. F1 Engine Power Secrets, Ian Bamsey, June 2000 RACER magazine
2. World Championship Grand Prix engine designations and configurations Leo Breevoort
3. moteurs
4. BMW Turbo F1 Engine Remi Humbert
5. FIA 2005 Regulations, 2005 Formula One technical regulations
6. 2006 Formula One technical regulations, chapter five, 15 December 2005
7. TOYOTA F1 technologies, TF106 Specification, 14 January 2006
8. Mosley punts for new Formula 1 rules in 2011

External links