PENDOLINO
- + Add to Faves
- + Translate
- + Share
العربية
ä¸å›½
Français
Deutsch
Ελληνική
हिनà¥à¤¦à¥€
Italiano
日本語
Português
РуÑÑкий
Español
'Pendolino' (from Italian ''Pendolo'' ['pndolo] "Pendulum" and ''-ino'', a diminutive suffix) is an Italian family of tilting trains used in Italy, Spain, Portugal, Slovenia, Finland, the Czech Republic, Slovakia, the United Kingdom, Switzerland and China. It was developed and manufactured by Fiat Ferroviaria, which was taken over by Alstom in 2002.
The idea of a tilting train became popular in the 1960s and 1970s when various rail operators, impressed by the high-speed rail services being put into place in France and Japan, wondered how they could similarly speed up travel without building a dedicated parallel rail network (as those two countries were doing). By tilting, the train could round curves designed for slower trains at higher speeds without causing undue discomfort to passengers.
In Italy various possibilities along these lines were explored (including one early design for fixed carriages with tilting seats). A number of prototypes were built and tested, and in 1975 a prototype Pendolino, the ETR 401, was put into public service, built by Fiat and operated by Italian State Railways. In 1987 operation began by a full fleet of updated Pendolinos (called the ETR 450), which incorporated some technologies from British Rail's ill-fated APT project. In 1993 the next generation, the ETR 460, began service. After ETR 460 ETR 480 was born and finally ETR 600.
:''See also VR Class Sm3''
The Finnish model, the S220, is based on the ETR 460, adapted to the specific requirements of VR (Valtionrautatiet, Finnish State Railways) and to the cold climatic conditions. The first two units were made in 1995 by Rautaruukki-Transtech, a rolling stock company which was part of Spanish Talgo until 2007, but is now back in Finnish ownership as Transtech Oy. Currently there are a total of 18 units operating.
The Pendolino has been conceived as an EMU (Electric Multiple Unit) to keep axle load to an extremely low level in order to allow the train to negotiate curves at a speed up to 35% faster than conventional Intercity trains (loco plus coaches).
The electrical traction equipment, with continuous power of 4000 kW, includes GTO chopper/inverter and asynchronous motors. The tilting system in the bogie, located entirely under the body, has permitted the reorganisation of the vestibules and passenger compartment areas. The bogie-to-body connection is extremely simple and easy to make, with clear advantages for maintenance.
The body, which exploits large aluminium extrusion technology, has substantial modularity and allows for extremely low axle weight, whilst fully respecting the highest safety standards, and allows the best exploitation of the space with different loading gauges.
The trains for VR are composed of 6 vehicles: two traction units, each of which consists of two motor coaches with a 4QC/inverter/converter with four traction motors (one for each bogie), plus a trailer coach with high voltage equipment (25 kV and 50 Hz) and traction transformer; and two end coaches with aerodynamic driving cab. One of the trailer coaches (TTC) has a special featured bar section.
The Finnish Pendolinos have received a lot of bad publicity in Finland for their serious reliability issues, mostly caused by technical problems with their tilting system and couplers. The coupling problems have grown important when the Pendolino network has been extended, requiring coupling and uncoupling at intersection stations. Because of unreliable uncoupling the train units often end up into different places than where they should be, often resulting in Pendolinos being replaced by commuter traffic equipment.
★ Maximum speed: 220 km/h
★ Power: 4,000 kW
★ Traction motors: 8 asynchronous three-phase AC
★ Acceleration, 0 - 100 km/h: 57 s, 810 m (a=0.50 m/s2)
★ Acceleration, 0 - 200 km/h: 193 s, 6,800 m (a=0.37 m/s2)
★ Braking, 140 - 0 km/h: 39 s,750 m (a=1.01 m/s2)
★ Braking, 200 - 0 km/h: 59 s, 1,650 m (a=0.94 m/s2)
★ Tractive effort at rims: 163 kN
★ Length: 158.9 m
★ Width: 3.2 m
★ Height: 3.73 m
★ Weight: 328 t (originally 316 t)
★ Maximum axle load: 14.3 t (originally 13.25 t)
★ Wheel diameter: new 890 mm, fully worn 850 mm
★ Gauge: 1,524 mm (for the Finnish version)
★ Maximum tilting angle: 8°
★ Total number of seats: 309 [307 + 2 H] (originally 262 + 2H)
★ Maximum noise level inside: 65 dBA
★ Ambient temperature range: -40 °C - +35 °C
In 2004 Virgin Trains in the UK began operating custom-designed Pendolino trains known as the Class 390 on its West Coast Main Line (WCML) franchise.
These trains were constructed by Alstom and are leased by Virgin Trains from Angel Trains.
Due to the failure of the WCML upgrade to provide in-cab signalling these units are limited in service to 125 mph (200 km/h) operation rather than their 140 mph (225 km/h) design speed. Virgin Trains are currently examining running these at 135 mph through the Trent Valley as part of their new WCML Franchise Proposal.
The Class 390 Pendolino are maintained by Alstom (West Coast Traincare) under contract to Virgin Trains until 2012. The main maintenance locations are Wembley, Midlands (Oxley, Wolverhampton), Manchester (Longsight), Glasgow (Polmadie), and Liverpool (minor work only) and several "Traincare Points" along the line of route (such as Euston and Carlisle). Headquarters for West Coast Traincare moved from the former Metro-Cammell factory at Washwood Heath in Birmingham upon its closure in November 2005 to Manchester Longsight depot with some functions being based at a new office facility at Oxley depot.
Virgin Trains have proposed the addition of a tenth (and possibly eleventh) car to the nine-car Class 390 trains in the near future to increase passenger capacity.
Two decades earlier British Rail had planned to bring tilting train technology to the same line with the APT project. Technical problems caused by pressure to launch the service early and lack of the political will to overcome them forced the abandonment of this early attempt, although much of the technology was used to design and build Pendolino trains.
On 23 February 2007, a Virgin Trains Pendolino train was derailed near Grayrigg, Cumbria. Sir Richard Branson credited the Pendolino with saving lives in the crash, describing it to BBC News as being "built like a tank." [1] A report released on the 4th of September 2007 found that faulty points were the cause of the accident. [2]
In Portugal the Pendolino is named Alfa Pendular and is operated by the Portuguese state railway company CP. It connects the cities of Braga, Porto, Aveiro, Coimbra, Santarém, Lisbon, Albufeira and Faro, among others, and has a top speed of 220 km/h (136.7 mph). The bogies had to be redesigned for operation on Portugal's broad gauge track, and the trains were assembled by Alstom at the Portuguese Amadora plant.
Slovenian Railways operates a Pendolino tilting train similar to the Italian model on its main lines. The ICS links the major cities of Slovenia in one line: Koper (only in summer), Ljubljana, Zidani Most, Celje and Maribor, with a frequent service that acts as a high-speed shuttle. Once per day the route from Maribor to Ljubljana is extended as international train to Venice via Monfalcone serving Trieste. For further information, see InterCitySlovenija.
In 2000 Fiat Ferroviaria undertook an order of construction of Czech tilting train and changed it to Pendolino. The first set was delivered in 2004 as Pendolino CD 680. While testing from Břeclav to Brno on November 18, 2004, the Pendolino reached a speed of 237 km/h and created a new Czech railway speed record.
The train was featured in the 2006 James Bond film Casino Royale. While in reality the Czech Pendolino does not actually operate the route, in the movie it was shown to journey from Switzerland to Montenegro.
During the testing period, the train had problems with the Czech signalling system. The problems were said to be solved and the trains entered regular service in December 2005 between Prague and Ostrava. As of late January 2006, all five Czech Pendolino trains that had been put in service suffer from software and functional problems. The range of problems was spanning from failing airconditioning and heating to failures of the tilting control. The supposedly ERTMS compliant control system ATLAS is not able to properly join several discrete systems each based on different software platforms. Similar problems have also been reported from Finland. All problems were fixed.
In December 2006 Czech Pendolino was given permission to operate in Slovakia and Austria. Since 10 December 2006 Czech Railways operates 7 times a day route Prague-Pardubice-Olomouc-Ostrava- (SuperCity Pendolino), 2 times a day between Prague-Brno-Vienna - (SuperCity Johann Gregor Mendel and SuperCity Smetana) and once a day Prague-Brno-Bratislava - (SuperCity Slovenská strela).
On August 28 2007 Karelian Trains ordered four 1520 mm gauge seven-car Pendolinos for use on 220 km/h St Petersburg - Helsinki services expected to start in 2010.[3]
Currently, a number of countries in Central and Eastern Europe have ordered Pendolino trainsets. For this reason, the Pendolino-type train is set to be the one with the greatest penetration in the high-speed market of Central and Eastern Europe.
China also purchased technologies from Alstom to assemble 60 sets of high speed EMU trains , which named CRH5, were based on Pendolino trains used in Finland. Those CRH5 trains, however, would not have tilting functions.
1. [1] "It is a very sad day - Branson." BBC News. 24 February 2007.
2. [2] "Train crash points not inspected " BBC News. 4 September 2007.
3. Karelian Trains awards Pendolino contract
★ ElettroTreno
★ New Pendolino
★ Tilting train
The idea of a tilting train became popular in the 1960s and 1970s when various rail operators, impressed by the high-speed rail services being put into place in France and Japan, wondered how they could similarly speed up travel without building a dedicated parallel rail network (as those two countries were doing). By tilting, the train could round curves designed for slower trains at higher speeds without causing undue discomfort to passengers.
| Contents |
| Italy |
| Finland |
| Technical information |
| United Kingdom |
| Portugal |
| Slovenia |
| Czech Republic |
| Russia |
| The future |
| References |
| See also |
Italy
In Italy various possibilities along these lines were explored (including one early design for fixed carriages with tilting seats). A number of prototypes were built and tested, and in 1975 a prototype Pendolino, the ETR 401, was put into public service, built by Fiat and operated by Italian State Railways. In 1987 operation began by a full fleet of updated Pendolinos (called the ETR 450), which incorporated some technologies from British Rail's ill-fated APT project. In 1993 the next generation, the ETR 460, began service. After ETR 460 ETR 480 was born and finally ETR 600.
Finland
An Sm3 class Pendolino in Helsinki Central Railway Station
:''See also VR Class Sm3''
The Finnish model, the S220, is based on the ETR 460, adapted to the specific requirements of VR (Valtionrautatiet, Finnish State Railways) and to the cold climatic conditions. The first two units were made in 1995 by Rautaruukki-Transtech, a rolling stock company which was part of Spanish Talgo until 2007, but is now back in Finnish ownership as Transtech Oy. Currently there are a total of 18 units operating.
The Pendolino has been conceived as an EMU (Electric Multiple Unit) to keep axle load to an extremely low level in order to allow the train to negotiate curves at a speed up to 35% faster than conventional Intercity trains (loco plus coaches).
The electrical traction equipment, with continuous power of 4000 kW, includes GTO chopper/inverter and asynchronous motors. The tilting system in the bogie, located entirely under the body, has permitted the reorganisation of the vestibules and passenger compartment areas. The bogie-to-body connection is extremely simple and easy to make, with clear advantages for maintenance.
The body, which exploits large aluminium extrusion technology, has substantial modularity and allows for extremely low axle weight, whilst fully respecting the highest safety standards, and allows the best exploitation of the space with different loading gauges.
The trains for VR are composed of 6 vehicles: two traction units, each of which consists of two motor coaches with a 4QC/inverter/converter with four traction motors (one for each bogie), plus a trailer coach with high voltage equipment (25 kV and 50 Hz) and traction transformer; and two end coaches with aerodynamic driving cab. One of the trailer coaches (TTC) has a special featured bar section.
The Finnish Pendolinos have received a lot of bad publicity in Finland for their serious reliability issues, mostly caused by technical problems with their tilting system and couplers. The coupling problems have grown important when the Pendolino network has been extended, requiring coupling and uncoupling at intersection stations. Because of unreliable uncoupling the train units often end up into different places than where they should be, often resulting in Pendolinos being replaced by commuter traffic equipment.
Technical information
★ Maximum speed: 220 km/h
★ Power: 4,000 kW
★ Traction motors: 8 asynchronous three-phase AC
★ Acceleration, 0 - 100 km/h: 57 s, 810 m (a=0.50 m/s2)
★ Acceleration, 0 - 200 km/h: 193 s, 6,800 m (a=0.37 m/s2)
★ Braking, 140 - 0 km/h: 39 s,750 m (a=1.01 m/s2)
★ Braking, 200 - 0 km/h: 59 s, 1,650 m (a=0.94 m/s2)
★ Tractive effort at rims: 163 kN
★ Length: 158.9 m
★ Width: 3.2 m
★ Height: 3.73 m
★ Weight: 328 t (originally 316 t)
★ Maximum axle load: 14.3 t (originally 13.25 t)
★ Wheel diameter: new 890 mm, fully worn 850 mm
★ Gauge: 1,524 mm (for the Finnish version)
★ Maximum tilting angle: 8°
★ Total number of seats: 309 [307 + 2 H] (originally 262 + 2H)
★ Maximum noise level inside: 65 dBA
★ Ambient temperature range: -40 °C - +35 °C
United Kingdom
An Alstom Class 390 Pendolino in Birmingham.
British Rail Class 370 APT, the predecessor of the Class 390
In 2004 Virgin Trains in the UK began operating custom-designed Pendolino trains known as the Class 390 on its West Coast Main Line (WCML) franchise.
These trains were constructed by Alstom and are leased by Virgin Trains from Angel Trains.
Due to the failure of the WCML upgrade to provide in-cab signalling these units are limited in service to 125 mph (200 km/h) operation rather than their 140 mph (225 km/h) design speed. Virgin Trains are currently examining running these at 135 mph through the Trent Valley as part of their new WCML Franchise Proposal.
The Class 390 Pendolino are maintained by Alstom (West Coast Traincare) under contract to Virgin Trains until 2012. The main maintenance locations are Wembley, Midlands (Oxley, Wolverhampton), Manchester (Longsight), Glasgow (Polmadie), and Liverpool (minor work only) and several "Traincare Points" along the line of route (such as Euston and Carlisle). Headquarters for West Coast Traincare moved from the former Metro-Cammell factory at Washwood Heath in Birmingham upon its closure in November 2005 to Manchester Longsight depot with some functions being based at a new office facility at Oxley depot.
Virgin Trains have proposed the addition of a tenth (and possibly eleventh) car to the nine-car Class 390 trains in the near future to increase passenger capacity.
Two decades earlier British Rail had planned to bring tilting train technology to the same line with the APT project. Technical problems caused by pressure to launch the service early and lack of the political will to overcome them forced the abandonment of this early attempt, although much of the technology was used to design and build Pendolino trains.
On 23 February 2007, a Virgin Trains Pendolino train was derailed near Grayrigg, Cumbria. Sir Richard Branson credited the Pendolino with saving lives in the crash, describing it to BBC News as being "built like a tank." [1] A report released on the 4th of September 2007 found that faulty points were the cause of the accident. [2]
Portugal
An Alfa Pendular composition leaving the Gare do Oriente station, Lisbon
In Portugal the Pendolino is named Alfa Pendular and is operated by the Portuguese state railway company CP. It connects the cities of Braga, Porto, Aveiro, Coimbra, Santarém, Lisbon, Albufeira and Faro, among others, and has a top speed of 220 km/h (136.7 mph). The bogies had to be redesigned for operation on Portugal's broad gauge track, and the trains were assembled by Alstom at the Portuguese Amadora plant.
Slovenia
Slovenian Railways operates a Pendolino tilting train similar to the Italian model on its main lines. The ICS links the major cities of Slovenia in one line: Koper (only in summer), Ljubljana, Zidani Most, Celje and Maribor, with a frequent service that acts as a high-speed shuttle. Once per day the route from Maribor to Ljubljana is extended as international train to Venice via Monfalcone serving Trieste. For further information, see InterCitySlovenija.
Czech Republic
In 2000 Fiat Ferroviaria undertook an order of construction of Czech tilting train and changed it to Pendolino. The first set was delivered in 2004 as Pendolino CD 680. While testing from Břeclav to Brno on November 18, 2004, the Pendolino reached a speed of 237 km/h and created a new Czech railway speed record.
The train was featured in the 2006 James Bond film Casino Royale. While in reality the Czech Pendolino does not actually operate the route, in the movie it was shown to journey from Switzerland to Montenegro.
A Czech 680 Pendolino in Kralupy nad Vltavou.
During the testing period, the train had problems with the Czech signalling system. The problems were said to be solved and the trains entered regular service in December 2005 between Prague and Ostrava. As of late January 2006, all five Czech Pendolino trains that had been put in service suffer from software and functional problems. The range of problems was spanning from failing airconditioning and heating to failures of the tilting control. The supposedly ERTMS compliant control system ATLAS is not able to properly join several discrete systems each based on different software platforms. Similar problems have also been reported from Finland. All problems were fixed.
In December 2006 Czech Pendolino was given permission to operate in Slovakia and Austria. Since 10 December 2006 Czech Railways operates 7 times a day route Prague-Pardubice-Olomouc-Ostrava- (SuperCity Pendolino), 2 times a day between Prague-Brno-Vienna - (SuperCity Johann Gregor Mendel and SuperCity Smetana) and once a day Prague-Brno-Bratislava - (SuperCity Slovenská strela).
Russia
On August 28 2007 Karelian Trains ordered four 1520 mm gauge seven-car Pendolinos for use on 220 km/h St Petersburg - Helsinki services expected to start in 2010.[3]
The future
Currently, a number of countries in Central and Eastern Europe have ordered Pendolino trainsets. For this reason, the Pendolino-type train is set to be the one with the greatest penetration in the high-speed market of Central and Eastern Europe.
China also purchased technologies from Alstom to assemble 60 sets of high speed EMU trains , which named CRH5, were based on Pendolino trains used in Finland. Those CRH5 trains, however, would not have tilting functions.
References
1. [1] "It is a very sad day - Branson." BBC News. 24 February 2007.
2. [2] "Train crash points not inspected " BBC News. 4 September 2007.
3. Karelian Trains awards Pendolino contract
See also
★ ElettroTreno
★ New Pendolino
★ Tilting train
This article provided by Wikipedia. To edit the contents of this article, click here for original source.
psst.. try this: add to faves
Featured Companies
| Great Time Travel | |
| Sheraton Vancouver Airport Hotel | |
| Optimum 1 Travel | |
| Aquaworld Cancun |
Pendolino Companies
Below is the list of travel companies in Pendolino we have in our travel directory
- Travel Agents (3)
