POCKET-HOLE JOINERY

Pocket-Hole Joinery, also known as Pocket-Screw Joinery, is – in its simplest terms – drilling a hole at an angle into one workpiece, and then joining it to a second workpiece with a self-tapping screw. The technique, in addition to doweling, has its roots in ancient Egypt. Egyptians clamped two workpieces together and bored a hole at an angle from the outside workpiece into the second workpiece. They then inserted a dowel with glue, and cut it off flush with the outermost surface.

Contents

Benefits

Applications

External Links

Benefits

★ Because the screws act as internal clamps, glue is unnecessary (but usually recommended) for most common joints. If glue is used, clamping is not required because of the ‘internal clamps’ holding the joint together while the glue dries.

★ Requires only one hole to be drilled, eliminating the need to precisely line up mating workpieces, as is required with dowel and mortise and tenon joints.

★ Does not require any complex mathematics or measurements, such as those used in mortise and tenon joints.

★ Modern Pocket-Hole Jigs such as the Kreg Jig™ allow simple wood joints to be created very quickly, with only a few steps.

Applications

External Links

★ Introduction to Pocket-Hole Joinery - A video which deomonstrates the simplicity of the Pocket-Hole Joinery technique, gives real-world examples of completed projects, and promotes the Kreg brand of Pocket-Hole Jigs through third party testimonials and straight forward examples.

★ Pocket-Hole Jig Interactive Tour - An interactive tour of a common Pocket-Hole Jig. Tour provides graphic illustrations and video clips which demonstrate how the jig is operated.