PRIMARY RATE INTERFACE
The 'primary rate interface' (PRI) is a telecommunications standard for carrying multiple DS0 voice and data transmissions between two physical locations.
All data and voice channels are ISDN and operate at 64 kbit/s.
North America and Japan use a T1 of 23 B channels and one D channel which corresponds to a T1 line.
Europe, Australia and most of the rest of the world use the slightly higher capacity E1, which is composed of 30 B channels and one D channel.
Fewer active B channels (also called user channels) can be used for a fractional T1. More channels can be used with more T1s, within certain design limits.
See T-carrier for DS0, T1, E1, T3, E3 and other carrier communications terms.
In the Integrated Services Digital Network (ISDN), there are two levels of service: the Basic Rate Interface (BRI), intended for the home and small enterprise, and the Primary Rate Interface (PRI), for larger users. Both rates include a number of B-channels and a D-channel. Each B-channel carries data, voice, and other services. The D-channel carries control and signaling information. The Basic Rate Interface consists of two 64 kbit/s B-channels and one 16 kbit/s D-channel. Thus, a Basic Rate Interface user can have up to 128 kbit/s service. The Primary Rate Interface consists of 23 B-channels and one 64 kbit/s D-channel using a T1 line or 30 B-channels and 1 D-channel using an E1 line. Thus, a Primary Rate Interface user on a T1 line can have up to 1.544 Mbit/s service or up to 2.048 Mbit/s service on an E1 line. PRI uses the Q.931 protocol over the D-channel.
The Primary Rate Interface channels are carried on a T-carrier system line (in the U.S., Canada, and Japan) or an E-carrier line (in other countries) and are typically used by medium to large enterprises. The 23 (or 30) B-channels can be used flexibly and reassigned when necessary to meet special needs such as videoconferences. The Primary Rate user is hooked up directly to the telephone company central office.
★ Basic Rate Interface
'Sources:' From Federal Standard 1037C
All data and voice channels are ISDN and operate at 64 kbit/s.
North America and Japan use a T1 of 23 B channels and one D channel which corresponds to a T1 line.
Europe, Australia and most of the rest of the world use the slightly higher capacity E1, which is composed of 30 B channels and one D channel.
Fewer active B channels (also called user channels) can be used for a fractional T1. More channels can be used with more T1s, within certain design limits.
See T-carrier for DS0, T1, E1, T3, E3 and other carrier communications terms.
In the Integrated Services Digital Network (ISDN), there are two levels of service: the Basic Rate Interface (BRI), intended for the home and small enterprise, and the Primary Rate Interface (PRI), for larger users. Both rates include a number of B-channels and a D-channel. Each B-channel carries data, voice, and other services. The D-channel carries control and signaling information. The Basic Rate Interface consists of two 64 kbit/s B-channels and one 16 kbit/s D-channel. Thus, a Basic Rate Interface user can have up to 128 kbit/s service. The Primary Rate Interface consists of 23 B-channels and one 64 kbit/s D-channel using a T1 line or 30 B-channels and 1 D-channel using an E1 line. Thus, a Primary Rate Interface user on a T1 line can have up to 1.544 Mbit/s service or up to 2.048 Mbit/s service on an E1 line. PRI uses the Q.931 protocol over the D-channel.
The Primary Rate Interface channels are carried on a T-carrier system line (in the U.S., Canada, and Japan) or an E-carrier line (in other countries) and are typically used by medium to large enterprises. The 23 (or 30) B-channels can be used flexibly and reassigned when necessary to meet special needs such as videoconferences. The Primary Rate user is hooked up directly to the telephone company central office.
| Contents |
| See also |
See also
★ Basic Rate Interface
'Sources:' From Federal Standard 1037C
This article provided by Wikipedia. To edit the contents of this article, click here for original source.
psst.. try this: add to faves

العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
Español