العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
EspañolRAPID PROTOTYPING
:''Rapid prototyping also describes a software engineering methodology.''
'Rapid prototyping' is the automatic construction of physical objects using solid freeform fabrication. The first techniques for rapid prototyping became available in the late 1980s and were used to produce models and prototype parts. Today, they are used for a much wider range of applications and are even used to manufacture production quality parts in relatively small numbers. Some sculptors use the technology to produce complex shapes for fine arts exhibitions.
Rapid prototyping takes virtual designs from computer aided design (CAD) or animation modeling software, transforms them into thin horizontal cross sections, still virtual, and then creates each cross section in physical space, one after the next until the model is finished. It is a WYSIWYG process where the virtual model and the physical model correspond almost identically.
With additive fabrication, the machine reads in data from a CAD drawing and lays down successive layers of liquid, powder, or sheet material, and in this way builds up the model from a series of cross sections. These layers, which correspond to the virtual cross section from the CAD model, are joined together or fused automatically to create the final shape. The primary advantage to additive fabrication is its ability to create almost any shape or geometric feature.
The standard data interface between CAD software and the machines is the STL file format. An STL file approximates the shape of a part or assembly using triangular facets. Tiny facets produce a higher quality surface.
The word "rapid" is relative: construction of a model with contemporary methods can take from several hours to several days, depending on the method used and the size and complexity of the model. Additive systems for rapid prototyping can typically produce models in a few hours, although it can vary widely depending on the type of machine being used and the size and number of models being produced simultaneously.
Some solid freeform fabrication techniques use two materials in the course of constructing parts. The first material is the part material and the second is the support material (to support overhanging features during construction). The support material is later removed by heat or dissolved away with a solvent or water.
Traditional injection molding can be less expensive for manufacturing plastic products in high quantities, but additive fabrication can be faster and less expensive when producing relatively small quantities of parts.
A large number of competing technologies are available in the marketplace. As all are additive technologies, their main differences are found in the way layers are built to create parts. Some are melting or softening material to produce the layers (SLS, FDM) where others are laying liquid materials thermosets that are cured with different technologies (SLA, MJM, PolyJet). In the case of lamination systems, thin layers are cut to shape and joined together.
★ Grenda, E. (2006). ''The Most Important Commercial Rapid Prototyping Technologies at a Glance''.
★ Wright, Paul K. (2001). ''21st Century manufacturing''. New Jersey: Prentice-Hall Inc.
★ Wohlers, T. (2007). ''Rapid Prototyping Terms and Descriptions''.
★ Solid freeform fabrication: A list of technologies used in rapid prototyping.
★ 3D printing: Faster, more affordable rapid prototyping
★ MeshLab An open source Windows and Linux application for visualizing, processing and converting 3D meshes to or from the STL file format.
★ 3D microfabrication
★ RepRap
★ The TCT Magazine: Bi Monthly Magazine covering RP
★ Additive manufacturing
★ The Rapid Prototyping Home Page
★
★ Fab@Home Home Page
★ RepRap Home Page
★ Technical Articles - Many articles on the subject from Wohlers Associates
A rapid prototyping machine using Selective laser sintering. Photo by Renato M.E. Sabbatini
'Rapid prototyping' is the automatic construction of physical objects using solid freeform fabrication. The first techniques for rapid prototyping became available in the late 1980s and were used to produce models and prototype parts. Today, they are used for a much wider range of applications and are even used to manufacture production quality parts in relatively small numbers. Some sculptors use the technology to produce complex shapes for fine arts exhibitions.
| Contents |
| Introduction |
| Technologies |
| References |
| See also |
| External links |
Introduction
Rapid prototyping takes virtual designs from computer aided design (CAD) or animation modeling software, transforms them into thin horizontal cross sections, still virtual, and then creates each cross section in physical space, one after the next until the model is finished. It is a WYSIWYG process where the virtual model and the physical model correspond almost identically.
With additive fabrication, the machine reads in data from a CAD drawing and lays down successive layers of liquid, powder, or sheet material, and in this way builds up the model from a series of cross sections. These layers, which correspond to the virtual cross section from the CAD model, are joined together or fused automatically to create the final shape. The primary advantage to additive fabrication is its ability to create almost any shape or geometric feature.
The standard data interface between CAD software and the machines is the STL file format. An STL file approximates the shape of a part or assembly using triangular facets. Tiny facets produce a higher quality surface.
The word "rapid" is relative: construction of a model with contemporary methods can take from several hours to several days, depending on the method used and the size and complexity of the model. Additive systems for rapid prototyping can typically produce models in a few hours, although it can vary widely depending on the type of machine being used and the size and number of models being produced simultaneously.
Some solid freeform fabrication techniques use two materials in the course of constructing parts. The first material is the part material and the second is the support material (to support overhanging features during construction). The support material is later removed by heat or dissolved away with a solvent or water.
Traditional injection molding can be less expensive for manufacturing plastic products in high quantities, but additive fabrication can be faster and less expensive when producing relatively small quantities of parts.
Technologies
A large number of competing technologies are available in the marketplace. As all are additive technologies, their main differences are found in the way layers are built to create parts. Some are melting or softening material to produce the layers (SLS, FDM) where others are laying liquid materials thermosets that are cured with different technologies (SLA, MJM, PolyJet). In the case of lamination systems, thin layers are cut to shape and joined together.
References
★ Grenda, E. (2006). ''The Most Important Commercial Rapid Prototyping Technologies at a Glance''.
★ Wright, Paul K. (2001). ''21st Century manufacturing''. New Jersey: Prentice-Hall Inc.
★ Wohlers, T. (2007). ''Rapid Prototyping Terms and Descriptions''.
See also
★ Solid freeform fabrication: A list of technologies used in rapid prototyping.
★ 3D printing: Faster, more affordable rapid prototyping
★ MeshLab An open source Windows and Linux application for visualizing, processing and converting 3D meshes to or from the STL file format.
★ 3D microfabrication
★ RepRap
★ The TCT Magazine: Bi Monthly Magazine covering RP
★ Additive manufacturing
External links
★ The Rapid Prototyping Home Page
★
★ Fab@Home Home Page
★ RepRap Home Page
★ Technical Articles - Many articles on the subject from Wohlers Associates
This article provided by Wikipedia. To edit the contents of this article, click here for original source.
psst.. try this: add to faves
Featured Companies
| Golf Holidays International |
Rapid prototyping Videos
 | InVesalius - free 3D medical imaging reconstruction software |
