AC COBRA

(Redirected from Shelby Cobra)

:''Shelby Cobra redirects here. See also the Shelby Mustang''
The 'AC Cobra' was a British sports car built in the 1960s.It was not the first car to combine a lightweight chassis and an aluminium body with a big American V8 engine, but it is possibly the most famous. The later, larger-engined cars are still among the highest-performing road vehicles ever sold.

Contents

History and Development

Continuation Cars

Super Snake

Appearances in pop culture

Film

Television

References

External links

Parts, Restoration and Replica manufacturers

History and Development

Before there was a Shelby, before there was an AC Ace, before there was a Cobra, there was a John Tojeiro. Mr. Tojeiro made the frames and chassis' for the local racers and coachbuilders. The first production Tojeiro had a ladderframe chassis with independent suspension all round using transverse leaf springs and lower wishbones. It was similar to the frames made by Cooper and Turner (most 'twin tube' Tojeiros were fitted with Turner alloy wheels), but most of John's customers came from East Anglia. One of his first customers was Brian Lister. He and John had been to the same school in Cambridge, and it was Brian Lister who put a V twin JAP engine in John's chassis. The result was remarkably quick.
Most Tojeiros were sold only as a chassis and it was up to the customer to source a body and running gear. One of the most successful of these cars was fitted with a Bristol engine and a copy of the barchetta body Touring had created for some early Ferraris. Registered LOY 500, and driven by Cliff Davis, this car was extremely successful in British racing and Davis later regretted replacing it with a Lotus Mk 10.
Davis wanted to put the car into production, but AC Cars was also looking for a new design and AC had a factory. Davis made an introduction, and so it was a Tojeiro with a similar body and a Lea Francis engine which AC tried. John sold the rights to AC for a royalty of £5 per chassis to a maximum of £500, later admitting to being naive in business. AC revised the body and the result was the AC Ace which became the basis of the Cobra. If Carroll Shelby was the father of the Cobra, John Tojeiro was its grandfather.
Like many British specialist manufacturers, AC Cars had been using the smooth, refined Bristol straight-6 engine in its small-volume production, including its AC Ace 2-seater roadster. The engine was a pre-World War II design of BMW which by the 60s the company knew was considered dated. Bristol decided in 1961 to cease production of its engine and instead to use Chrysler 313cid (5.1 L) V8 engines. Although untrue, it is commonly believed that AC was left without a future source of power and that American ex-racing driver Carroll Shelby saved the company from bankruptcy. AC started using the 2.6 liter Ford Zephyr in all of its cars. Shelby, in September 1961 airmailed AC a letter asking them if they would build him a car modified to accept a V8 engine. Shelby had previous experience with Anglo-American hybrids, having raced an Allard. He first went to Chevrolet to see if they would provide him with engines, but not wanting to add competition to the Corvette they said no. Ford however, wanted a car that could compete with the Corvette and they happened to have a brand new thin wall small block engine which could be used in this endeavor.

AC agreed, provided a suitable engine could be found. It was, in the form of, Ford's 260 in³ HiPo (4.2 L) engine - a new lightweight, thin-wall cast small-block V8 tuned for high performance. In early 1962 the first engineless AC was air-freighted to Shelby's Los Angeles facility, where it was fitted with an engine and transmission in less than eight hours and taken out on test. Carroll Shelby claims the name "Cobra" came to him in a dream.
Production proved to be easy, since AC had already made most of the modifications needed for the small block V8 when they installed the 2.6 liter Ford Zephyr. As a matter of fact, the extensive rework of the AC Bristol's front end which is often attributed to Shelby was done by AC for the Ford Zephyr version. The most important modification was the fitting of a stronger rear differential to handle V8 power. A Salisbury 4HU unit with in-board disk brakes (to reduce unsprung weight) was chosen instead of the old ENV unit. It was the same unit used on the Jaguar E-Type. On the production version, the inboard brakes were moved outboard to reduce cost. In short, the front end of the new Cobra was entirely AC Ace 2.6 apart from the mounting of the steering box which had to be moved outwardly to clear the wider V8 motor.

The first 75 Cobra mark I (including the prototype) were fitted with the 260 engine (4.2 L). The remaining 51 Mark I models were fitted with a larger version of the Windsor Ford engine, the 289 in³ (4.7 L) V8. Toward the end of 1962, Alan Turner who was the chief engineer at AC completed a major design change of the car's front end and was able to fit it with rack and pinion steering while still using transverse leaf springs suspension. The new car went into production in early 1963 and it became known as the Mark II. The steering rack was borrowed from the MGB while the new steering column came from the VW Beetle. About 528 Mark II Cobras were produced to the summer of 1965 (the last US bound Mark II was produced in November of 1964).
By 1963 the leaf spring Cobra was losing its supremacy in racing, Shelby tried fitting a big Ford FE engine of 390 in³. Ken Miles drove and raced the FE powered Mark II car and said that the car was virtually undrivable, naming it 'The Turd!' A new chassis was needed! The new car would take the designation Mark III.
The new car was designed in cooperation with Ford in Detroit. A whole new chassis was built which featured 4" main chassis tubes (instead of 3") and coil spring suspension all around. The new car also had wide fenders and a larger radiator opening. It was powered by the famed "side oiler" Ford 427 engine (7.0 L) developing 425 bhp and attaining a top speed of 163 mph (262 km/h) in the standard model and 485 bhp with a top speed of 180 mph in the competition and semi-competition (S.C.) models. The production of the Cobra Mark III began on January 1st 1965, as two prototypes had been sent to the United States in October of 1964. Cars were sent to the US as unpainted rolling chassis, and they would be finished in Shelby's workshop. Although an impressive automobile, the car was a financial failure and did not sell well. To save cost, some AC Cobras MK III were fitted with Ford's 428 in³ (7.0 L) engine, a long stroke, smaller bore, lower cost engine, intended for road use rather than racing. It seems that a total of 300 mark III cars were sent to Shelby in the USA during the years 1965 and 1966, including the competition version. 27 small block narrow fender version which were referred to as the AC 289 were sold in Europe. Unfortunately, The MK III missed homologation for the 1965 racing season and was not raced by the Shelby team. However, it was raced successfully by many privaters and went on to win races all the way into the 70's. Interestingly, 31 unsold competition cars were detuned and made road worthy and called S/C for street-competition. Today, these are the rarest and the most valuable models and can sell for in excess of a million and a half Dollars.
Shelby Cobras had an extensive racing career. Shelby wanted it to be a "Corvette-Beater" and at nearly 500lbs. less than the Chevrolet Corvette, the lightweight car did just that. The Cobra was perhaps too successful in the performance department and reputedly contributed to the implementation of national speed limits in the United Kingdom. A Shelby-American Cobra Coupe was calculated to have done 185mph on the M1 motorway in 1964, driven by Jack Sears and Peter Bolton during shakedown tests prior to that year's Le Mans 24h race[1]. However, government officials have cited the increasing accident death rate in the early 1960s as the principal motivation, the exploits of the AC Cars team just highlighting the potential risk.

Although extremely successful in racing, The Shelby Cobra was a financial failure, which led Carroll Shelby to discontinue building cars in 1967. AC Cars kept producing the coil springs AC Roadster with narrow fenders, a small block Ford 289 and called the car the AC 289, it was build and sold in Europe until 1969. AC also produced the AC 428 until 1973. The AC Frua was built on a stretched Cobra 427 MK III coil spring chassis using a very handsome steel body designed and built by Pietro Frua; and the slower revving Ford 428 (7.0L) engine. With the demise of the Frua, AC went on building lesser cars and fell into bankruptcy in the late 1970s'. The company's tooling and eventually the right to use the name, were acquired by Autocraft a Cobra part reseller and replica car manufacturer owned by Brian A. Angliss. Autocraft was manufacturing an AC 289 continuation car called the Mark IV. Carroll Shelby eventually filed suit against AC Cars and Brian A. Angliss, in U.S. District Court in Los Angeles. The ensuing settlement resulted in Shelby and AC Cars/Angliss releasing a joint press release whereby AC/Angliss acknowledged that Carroll Shelby was (and is) the manufacturer of record of all the 1960s AC Cobra automobiles in the United States. This definitively puts to rest any debate over who actually built the car; Shelby was determined to have built the cars using some foreign-sourced components. Carroll Shelby's company Shelby Automobiles, Inc. manufactures the Shelby Cobra 289, FIA 289 and 427 S/C continuation cars at its facility in Las Vegas, Nevada. The cars are available in aluminum like the originals and in fiberglass at a lesser cost. In 2006 Carol Shelby's own Shelby Cobra sold at an auction in Arizona for £2.8million^[1].

The Cobra is probably the most cloned car in history; an astounding number of replica Cobras have been produced, to the extent that the originals are in a minority. Originals, that is cars produced by the AC Cars and Shelby partnership, number just over 1000 cars. Many are Cobra lookalikes of dubious quality, while others are extremely close replicas as with the Kirkham Motorsport series built in Poland by aircraft engineers in an old Mig fighter factory or the Cobra Daytona coupes built by Mike McCluskey Limited. Other well known replica manufacturers are E.R.A, Dax, and Unique.
To Cobra purists however the provenance of what can be truly called a Cobra rests with what lineage the manufacturer has with the original partnership of AC Cars and Shelby Automobiles. AC Cars and its successors had possession of the original body moulds and manufacturing dies to produce a true Cobra body, Shelby American had the history and the inherited authority to dictate the specification of the engine, suspension and power train. AC Cars (AutoKraft Ltd) continued to produce Cobras in the form of the AC Mark IV from 1982 until February 2004. Then after four decades of working separately on different production versions of the Cobra these two companies once again joined forces to manufacture a car in true to the original Cobra history. This Cobra was offered in two models, the Shelby AC 427 S/C Cobra and the Shelby AC 289 FIA Cobra, which is branded as the CSX 1000 and the CSX 7500 Series. This partnership, just like its predecessor disintegrated, this time in 2006.
Shelby worked with the Chrysler Corporation from 1989 to 1991 to help develop and style the Viper supercar and in the late 1990s, developed his own Series 1, a composite-bodied high performance car powered by the 4.0 L, DOHC, 32-valve V8 from the Oldsmobile Aurora luxury sedan producing 320 hp (239 kW). A more powerful supercharged version was available in limited quantities as well. The Viper and Series 1 are considered to be the successors to the Cobra, although the Series 1 was/is more like the Cobra than the Viper is, while the Viper's big, raw, and powerful pushrod V-10 engine is much more like the Cobra's 427 than the Series 1's quad-cam 4.0 V-8.
==Coupes or Coupé==

In an effort to improve top speed along the legendary Mulsanne Straight at the 24 Hours of Le Mans race, a number of enclosed, coupe variations were constructed using the leafspring chassis and running gear of the Shelby Cobra Mark II. The most famous and numerous of these were the official works Shelby Daytona Cobra Coupes. Six were constructed in total, each being subtly different from the rest. AC also produced a Le Mans coupe, The car was a one-off and was nearly destroyed after a high-speed tyre blow-out at the 1964 Le Mans race. It has been completely rebuilt and now sits in private hands in England. The third significant Cobra-based coupe was the Willment Cobra Coupe built by the JWA racing team. Mike Mc Cluskey of Torrance California (one of the best Cobra restorers in the world), builds an exact replica of the racing Shelby Daytona coupe, these cars are exact reproductions of the originals. Also, a road-going Shelby Daytona Cobra replica is being manufactured by Superformance, a well known kit car company. These cars use Peter Brock's bodywork designs, scaled up by to increase room inside, and a newly designed spaceframe chassis, they are powered by Roush-built Ford Windsor (Sportsman) engines. The Superformance Shelby Daytona Coupe is the only modern-day vehicle recognized by Shelby as a successor to the original Coupes. Peter Brock's Australian namesake, the race car driver, was killed while driving a GM-powered replica of a Shelby Daytona Coupe in competition in Australia in 2006.

Continuation Cars

In 2003, Carroll Shelby International Inc. and AC Motor Holdings, Ltd. announced production of authentic Shelby/AC Cobra[2], with the production vehicle arriving at dealers in July 2004[3]. Initially available models included Shelby AC 427 S/C Cobra and Shelby AC 289 FIA Cobra, which will be branded as the CSX 1000 and CSX 7500 Series, respectively. In February 2004 the first handcrafted aluminum body shell was built. However, AC Motor Holdings, Ltd. failed to perform under the terms of its license agreement with Carroll Shelby, and a lawsuit was filed by Shelby against AC Motor Holdings, Ltd. and its proprietor, Alan Lubinsky, in May 2006.

Super Snake

Shelby Motors built twenty three 427 competition roadsters. In 1967, two of them were selected and converted into a special model called the 427 Cobra Semi-Competition Super-Snake. The first one of these (number CSX 3015) was originally part of a European promotional tour before it's conversion.http://www.barrett-jackson.com/carlist/cardetails.asp?In_AuctionID=221&In_LotNumber=1301 This conversion called for making the original racing model street legal with mufflers, a windshield and bumpers amongst other modifications. But some things were not modified, including the racing rear end, brakes and headers. The most notable Super-Snake modification is the addition of Twin Paxton Superchargers. This gave the car an alleged 800 brake horsepower (bhp) and 462 ft. lbs. of torque at an astounding low 2800 RPM. Officially rated at 0-to-60 at 4.5 seconds; legend and lore have it as doing that in a little over 3 seconds.
Another non-competition 427 roadster was converted into a Super-Snake (CSX 3303) and given to Shelby's close friend, Bill Cosby. Cosby attempted to drive the super-fast Cobra, but had issues with keeping it under control. This was humorously documented in Cosby's album titled "Bill Cosby, 200 M.P.H.". Cosby then gave the car back to Shelby, who then shipped it out to one of their dealers in San Francisco, S&C Ford on Van Ness Avenue. S&C Ford then sold it to customer Tony Maxey. Maxey, suffering the same issues as Cosby did with the car, lost control and drove it off of a cliff, landing in the Pacific Ocean waters, killing himself and destroying the car. It was eventually recovered and the wreckage was bought by Brian Angliss of CP Autokraft. He is expected to auction his restored version in the future.
Shelby's original model, CSX 3015, was kept by Carroll Shelby himself over the years as a personal car, sometimes entering it into local races like the Turismos Visitadores Cannonball-Run like race in Nevada, where he was "waking [up] whole towns, blowing out windows, throwing belts and catching fire a couple of times, but finishing." Shelby later sold CSX 3015 to Jimmy Webb for $10,500. During the collector car bubble of 1989–90, Webb was said to have turned down $1.2 million for the car, but the car was seized by the IRS, after owing millions in back taxes and was auctioned off in 1995 for $375,000.^[2] CSX 3015 was auctioned off on January 22, 2007 at the Barrett-Jackson Collector Car Event in Scottsdale, Arizona for $ 5,5 Million USD + commission (a record for Cobras, and a record for a Barrett-Jackson sold price)

Appearances in pop culture

Film

★ The Gumball Rally (1976)

★ The Hollywood Knights (1980)

★ Romancing the Stone (1984)

★ Bad Boys (1995)

★ Lock, Stock and Two Smoking Barrels (1998)

★ Gone In 60 Seconds (2000)

★ Austin Powers

★ John Doe (2002 - 2003)

★ The Punisher (2004)

★ Cobra Film

★ Twin Town (1997)

★ Redline (2007)

Television

★ Lupin III: Episode 0 - First Contact

★ Gunsmith Cats

★ Gungrave Bunji Kugashira's car

★ Honey West 1965

References

1. http://www.thesun.co.uk/article/0,,2-2007030759,00.html
2. http://www.sportscarmarket.com/profiles/2007/April/American/index.html

External links

★ Cobra Magazine Website, UK

★ The official Carroll Shelby website, Los Angeles, California

★ Shelby Automobiles Inc., Las Vegas, Nevada

★ 64' AC Coupe - Vintage Photos

★ Rare CSX2345 Photos and Information

★ Shelby American Automobile Club, Sharon, Connecticut

★ Shelby American Collection, Boulder, Colorado

★

★ Barrett-Jackson's information about the sold 5,5 million dollar super snake

★ Shelby and AC Cars join forces after 40 years

Parts, Restoration and Replica manufacturers

★ Superformance

★ Mc. Cluskey Limited

★ Kirkham Motorsport