SPEEDSTEP

'SpeedStep' is a trademark for a series of technologies (including SpeedStep, SpeedStep II, and SpeedStep III) built into some Intel microprocessors that allows the clock speed of the processor to be dynamically changed by software.

Contents

Explanation

Operating system support

Versions

See also

External links

Notes

Explanation

Running a processor at high clock speeds allows for better performance. However, when the same processor is run at a lower frequency, it generates less heat and consumes less power. In many cases, the core voltage can also be reduced, further reducing power consumption and heat generation. This can conserve battery power in notebooks, extend processor life, and reduce noise generated by variable-speed fans. By using SpeedStep, users can select the balance of power conservation and performance that best suits them, or even change the clock speed dynamically as the processor burden changes.
For example, a Pentium M processor marketed at 1.5 GHz can run at speeds between 600 MHz and 1.5 GHz, in 300 MHz increments using SpeedStep III. Older processors, using older versions of the SpeedStep technology, have fewer increments, such as the Pentium 4-M. For example, a 1.7 GHz Pentium 4M can run at 1.6 GHz, at 1.2 GHz, and at 786 MHz.
SpeedStep technology is partly responsible for the reduced power consumption of Intel’s Pentium M processor, part of the Centrino brand.

Operating system support

Under older Microsoft Windows operating systems, including Windows 2000 and previous versions, a special driver and dashboard application were needed to access the SpeedStep feature. Intel's website specifically states that such drivers ''must'' come from the computer manufacturer; there are no generic drivers supplied by Intel which will enable SpeedStep for older Windows versions if one cannot obtain a manufacturer's driver.^[1][2]
In contrast, AMD continues to supply and support drivers for its competing PowerNow! technology that will work on Windows 2000, ME, 98, and NT.^[3][4]
Linux has full SpeedStep support already integrated in the kernel and, under Microsoft Windows XP, SpeedStep support is built into the power management console under the control panel. In Windows XP a user can regulate the processor's speed indirectly by changing power schemes. The "Portable/Laptop" power scheme enables SpeedStep, while "Home/Office Desk" disables SpeedStep.
Mac OS also has SpeedStep built into the kernel, since the release of the Intel version of OS X 10.4.

Versions

'V1.1' is used by second generation Pentium III processors. It enables the CPU to switch between two modes: high and low frequency. This is done by modifying the CPU's multiplier. A 1 GHz Pentium III consuming about 20 watts could be reduced to 600 MHz which reduces the power consumption to about 6 watts.
'V2.1' (Enhanced SpeedStep) is used in Pentium III-Mobile processors and is similar to the previous version, but in the low frequency mode the CPU also uses a different voltage than the high frequency mode.
'V2.2' is adapted for Pentium 4-Mobile processors. With this a 1.8 GHz Pentium 4-M consuming about 30 watts can lower its frequency to 1.2 GHz, thus reducing power consumption to about 20 watts.
'V3.1' (EIST) is used with the second generation of Pentium Mobile processors (Banias core, used in Centrino platforms). With this technology the CPU varies its frequency (and voltage) between about 40% and 100% of its base frequency in increments of 100 MHz. With this technology Intel also introduces realtime Level 2 cache capacity variation, further improving power savings.
'V3.2' (Enhanced EIST) is adapted for dual-core processors with unified Level 2 cache.

See also

★ AMD's Cool'n'Quiet and PowerNow!

★ Power management

External links

★ SpeedStep FAQ

Notes

{{FootnotesSmall|resize=