VON NEUMANN ALGEBRA
- + Add to Faves
- + Translate
- + Share
العربية
ä¸å›½
Français
Deutsch
Ελληνική
हिनà¥à¤¦à¥€
Italiano
日本語
Português
РуÑÑкий
Español
A 'von Neumann algebra' or 'W
★ -algebra' is a
★ -algebra of bounded operators on a Hilbert space that is closed in the weak operator topology and contains the identity operator. They were originally introduced by John von Neumann, motivated by the study of single operators, group representations, ergodic theory and quantum mechanics. His double commutant theorem shows that the analytic definition is equivalent to a purely algebraic definition as an algebra of symmetries.
Two basic examples of von Neumann algebras are as follows. The ring ''L''∞('R') of essentially bounded measurable functions on the real line is a commutative von Neumann algebra, which acts by pointwise multiplication on the Hilbert space ''L''2('R') of square integrable functions. The algebra ''B''(''H'') of all bounded operators on a Hilbert space ''H'' is a von Neumann algebra, non-commutative if the Hilbert space has dimension at least 2.
von Neumann algebras, under the original name of 'rings of operators', were first studied by von Neumann in 1929; he and Francis Murray developed the basic theory in a series of papers starting in 1936.
There are three common ways to define von Neumann algebras.
The first and most common way is to define them as weakly closed
★ algebras of bounded operators (on a Hilbert space) containing the identity. In this definition the weak (operator) topology can be replaced by almost any other common topology other than the norm topology,
in particular by the strong, ultrastrong or ultraweak operator topologies . (The
★ algebras of bounded operators that are closed in the norm topology are C
★ algebras, so in particular any von Neumann algebra is a
C
★ algebra.)
The second definition is that a von Neumann algebra is a subset of the bounded operators closed under
★ and equal to its double commutant, or equivalently the commutant of some subset closed under
★ . The
von Neumann double commutant theorem says that the first two definitions are equivalent.
The first two definitions define a von Neumann algebras concretely as a set of operators acting on some given Hilbert space. Von Neumann algebras can also be defined abstractly as C
★ algebras that have a predual; in other words the von Neumann algebra, considered as a Banach space, is the dual of some other Banach space called the predual. The predual of a von Neumann algebra is unique up to isomorphism.
Some authors use "von Neumann algebra" for the algebras together with a Hilbert space action, and "W
★ algebra" for the abstract concept, so a von Neumann algebra is a W
★ algebra together with a Hilbert space and a suitable faithful unital action on the Hilbert space. The concrete and abstract definitions of a von Neumann algebra are similar to the concrete and abstract definitions of a C
★ algebra, which can be defined either as norm-closed
★ algebras of operators on a Hilbert space, or as Banach
★ -algebras such that ||''a'' ''a
★ ''||=||''a''|| ||''a
★ ''||.
Some of the terminology in von Neumann algebra theory can be confusing, and the terms often have different meanings outside the subject.
★ A 'finite' von Neumann algebra is one which is the direct integral of finite factors. Similarly, 'properly infinite' von Neumann algebras are the direct integral of properly infinite factors.
★ A von Neumann algebra that acts on a separable Hilbert space is called 'separable'. Note that such algebras are rarely separable in the norm topology.
★ The von Neumann algebra 'generated' by a set of bounded operators on a Hilbert space is the smallest von Neumann algebra containing all those operators.
★ The 'tensor product' of two von Neumann algebras acting on two Hilbert spaces is defined to be the von Neumann algebra generated by their algebraic tensor product, considered as operators on the Hilbert space tensor product of the Hilbert spaces.
:''Main article: Abelian von Neumann algebra''
The relationship between commutative von Neumann algebras and measure spaces is analogous to that between commutative C
★ -algebras and locally compact Hausdorff spaces. Every commutative von Neumann algebra is isomorphic to ''L''∞(''X'') for some measure space (''X'', μ) and for every σ-finite measure space ''X'', conversely, ''L''∞(''X'') is a von Neumann algebra.
Due to this analogy, the theory of von Neumann algebras has been called noncommutative measure theory, while the theory of C
★ -algebras is sometimes called noncommutative topology.
Operators ''E'' in a von Neumann algebra for which ''E'' = ''EE'' = ''E
★ '' are called 'projections'; they are exactly the operators which give an orthogonal projection of ''H'' onto some closed subspace.
A subspace of the Hilbert space ''H'' is said to 'belong to' the von Neumann algebra ''M'' if it is the image of some projection in ''M''. Informally these are the closed subspaces that can be described using elements of ''M'', or that ''M'' "knows" about. The closure of the image of any operator in ''M'', or the kernel of any operator in ''M'' belong to ''M'', and the closure of the image of any subspace belonging to ''M'' under an operator of ''M'' also belongs to ''M''. There is a 1:1 correspondence between projections of ''M'' and subspaces that belong to it.
Two subspaces belonging to ''M'' are called ('Murray-von Neumann') 'equivalent' if there is a partial isometry mapping the first isomorphically onto the other that is an element of the von Neumann algebra (informally, if ''M'' "knows" that the subspaces are isomorphic). This induces a natural equivalence relation on projections by defining ''E'' to be equivalent to ''F'' if the corresponding subspaces are equivalent, or in other words if there is a partial isometry of ''H'' that maps the image of ''E'' isometrically to the image of ''F'' and is an element of the von Neumann algebra. Another way of stating this is that ''E'' is equivalent to ''F'' if ''E=uu
★ '' and ''F=u
★ u'' for some partial isometry ''u'' in ''M''.
The equivalence relation ~ thus defined is additive in the following sense: Suppose ''E''1 ~ ''F''1 and ''E''2 ~ ''F''2. If ''E''1 ⊥ ''E''2 and ''F''1 ⊥ ''F''2, then ''E''1 + ''E''2 ~ ''F''1 + ''F''2. This is not true in general if one requires unitary equivalence in the definition of ~, i.e. if we say ''E'' is equivalent to ''F'' if ''u
★ Eu'' = ''F'' for some unitary ''u''. .
The subspaces belonging to ''M'' are ordered by inclusion, and this induces a partial order ≤ of projections.
There is also a natural partial order on the set of ''equivalence classes'' of projections, induced by the partial order ≤ of projections. If ''M'' is a factor, ≤ is a total order on equivalence classes of projections, described in the section on traces below.
A projection (or subspace belonging to ''M'') ''E'' is said to be ''finite'' if there is no projection ''F'' < ''E'' that is equivalent to ''E''. For example, all finite-dimensional projections (or subspaces) are finite (since isometries between Hilbert spaces leave the dimension fixed), but the identity operator on an infinite-dimensional Hilbert space is not finite in the von Neumann algebra of all bounded operators on it, since it is isometrically isomorphic to a proper subset of itself. However it is possible for infinite dimensional subspaces to be finite.
Orthogonal projections are noncommutative analogues of indicator functions in ''L''∞('R'). ''L''∞('R') is the ||·||∞-closure of the subspace generated by the indicator functions. Similarly, a von Neumann algebra is generated by its projections; this is a consequence of the spectral theorem for self-adjoint operators.
A von Neumann algebra ''N'' whose center consists only of multiples of the identity operator is called a 'factor'. Every von Neumann algebra on a separable Hilbert space is isomorphic to a direct integral of factors. This decomposition is essentially unique. Thus, the problem of classifying isomorphism classes of von Neumann algebras on separable Hilbert spaces can be reduced to that of classifying isomorphism classes of factors.
Every factor has one of 3 types as described below.
The type classification can be extended to von Neumann algebras that are not factors, and a von Neumann algebra is of type X if it can be decomposed as a direct integral of type X factors; for example, every commutative von Neumann algebra has type I1. Every von Neumann algebra can be written
uniquely as a sum of von Neumann algebras of types I, II, and III.
There are several other ways to divide factors into classes that are sometimes used:
★ A factor is called 'discrete' (or occasionally 'tame') if it has type I, and 'continuous' (or occasionally 'wild') if it has type II or III.
★ A factor is called 'semifinite' if it has type I or II, and 'purely infinite' if it has type III.
★ A factor is called 'finite' if the projection 1 is finite and 'properly infinite' otherwise. Factors of types I and II may be either finite or properly infinite, but factors of type III are always properly infinite.
A factor is said to be of 'type I' if there is a minimal projection, i.e. a projection ''E'' such that there is no other projection ''F'' with 0 < F < E. Any factor of type I is isomorphic to the von Neumann algebra of ''all'' bounded operators on some Hilbert space; since there is one Hilbert space for every cardinal number, isomorphism classes of factors of type I correspond exactly to the cardinal numbers. Since many authors consider von Neumann algebras only on separable Hilbert spaces, it is customary to call the bounded operators on a Hilbert space of finite dimension ''n'' a factor of type In, and the bounded operators on a separable infinite-dimensional Hilbert space, a factor of type I∞.
A factor is said to be of 'type II' if there are non-zero finite projections, but every projection ''E'' can be halved in the sense that there are equivalent projections ''F'' and ''G'' such that ''E'' = ''F'' + ''G''. If the identity operator in a type II factor is finite, the factor is said to be of type II1; otherwise, it is said to be of type II∞. The best understood factors of type II are the hyperfinite type II1 factor and the hyperfinite type II∞ factor.
These are the unique hyperfinite factors of types II1 and II∞; there are an uncountable number of other
factors of these types that are the subject of intensive study.
A factor of type II1 has a unique finite tracial state,
and the set of traces of projections is [0,1].
A factor of type II∞ has a semifinite trace, unique up to
rescaling, and the set of traces of projections is [0,∞]. The set of real numbers λ such that there is an automorphism rescaling the trace by a factor of λ is called the 'fundamental group' of the type II∞ factor.
The tensor product of a factor of type II1 and an infinite
type I factor has type II∞, and conversely any factor of
type II∞ can be constructed like this. The 'fundamental group' of a type
II1 factor is defined to be the fundamental group of its tensor product with the infinite (separable) factor of type I. For many years it was an open problem to find a type II factor whose fundamental group was not the group of all positive reals, but Connes then showed that the von Neumann group algebra of a countable discrete group with Kazhdan's property T (the trivial representation is isolated in the dual space), such as SL3('Z'), has a countable fundamental group. Subsequently Sorin Popa showed that the fundamental group can be trivial for certain groups, including the semidirect product of 'Z'2 by SL2('Z').
An example of a type II1 factor is the von Neumann group algebra
of a countable infinite discrete group such that every non-trivial conjugacy class is infinite.
Dusa McDuff found an uncountable family of such groups with non-isomorphic von Neumann group algebras, thus showing the existence of uncountably many different separable type II1 factors.
Lastly, 'type III' factors are factors that do not contain any nonzero finite projections at all. Since the identity operator is always infinite in those factors, they were sometimes called type III∞ in the past, but recently that notation has been superseded by the notation IIIλ, where λ is a real number in the interval [0,1]. More precisely, if the Connes spectrum (of its modular group) is 1 then the factor is of type III0, if the Connes spectrum is all integral powers of λ for 0<λ<1, then the type is IIIλ, and if the Connes spectrum is all positive reals then the type is III1. (The Connes spectrum is a closed subgroup of the positive reals, so these are the only possibilities.) The only trace on type III factors takes value ∞ on all non-zero positive elements, and any two non-zero projections
are equivalent. At one time type III factors were considered to be intractable objects, but Tomita-Takesaki theory
has led to a good structure theory. In particular, any type III factor can be written in a canonical way as the crossed product of a type II∞ factor and the real numbers.
Any von Neumann algebra ''M'' has a 'predual' ''M''
★ , which is the Banach space of all ultraweakly continuous linear functionals on ''M''. As the name suggests, ''M'' is (as a Banach space) the dual of its predual. The predual is unique in the sense that any other Banach space whose dual is ''M'' is canonically isomorphic to ''M''
★ . As mentioned above, the existence of a predual characterizes von Neumann algebras among C
★ algebras.
The definition of the predual given above seems to depend on the choice of Hilbert space that ''M'' acts on, as this determines the ultraweak topology.
However the predual can also be defined without using the Hilbert space that ''M'' acts on, by defining it to be the space generated by all positive 'normal' linear functionals on ''M''.
(Here "normal" means that it preserves suprema when applied to increasing nets of self adjoint operators; or equivalently to increasing sequences of projections.)
The predual ''M''
★ is a closed subspace of the dual ''M''
★ (which consists of all norm-continuous linear functionals on ''M'') but is generally smaller. The proof that ''M''
★ is (usually) not the same as ''M''
★ is nonconstructive and uses the axiom of choice in an essential way; it is very hard to exhibit explicit elements of ''M''
★ that are not in ''M''
★ . For example, exotic positive linear forms on the von Neumann algebra ''l''∞ (''Z'') are given by free ultrafilters; they correspond to exotic
★ -homomorphisms into ''C'' and describe the Stone-Cech compactification of ''Z''.
Examples:
#The predual of the von Neumann algebra ''L''∞('R') of essentially bounded functions on 'R' is the Banach space ''L''1('R') of integrable functions.
#The predual of the von Neumann algebra ''B''(''H'') of bounded operators on a Hilbert space ''H'' is the Banach space of all trace class operators with the trace norm ||''A''||= Tr(|''A''|). The Banach space of trace class operators is itself the dual of the C
★ -algebra of compact operators (which is not a von Neumann algebra).
★ A 'weight' ω on a von Neumann algebra is a linear map from the set of positive elements (those of the form ''aa
★ '') to [0,∞].
★ A 'positive linear functional' is a weight with ω(1) finite (or rather the extension of ω to the whole algebra by linearity).
★ A 'state' is a weight with ω(1)=1.
★ A 'trace' is a weight with ω(''aa
★ '')=ω(''a
★ a'') for all ''a''.
★ A 'tracial state' is a trace with ω(1)=1.
Any factor has a trace such that the trace of a non-zero projection is non-zero
and the trace of a projection is infinite if and only if the projection is infinite.
Such a trace is unique up to rescaling. For factors that are separable or finite, two projections are equivalent if and only if they have the same trace. The type of a factor can be read off from the possible values of this trace as follows:
★ Type In: 0, ''x'', 2''x'', ....,''nx'' for some positive ''x'' (usually normalized to be 1/''n'' or 1).
★ Type I∞: 0, ''x'', 2''x'', ....,∞ for some positive ''x'' (usually normalized to be 1).
★ Type II1: [0,''x''] for some positive ''x'' (usually normalized to be 1).
★ Type II∞: [0,∞].
★ Type III: 0,∞
If a von Neumann algebra acts on a Hilbert space containing a norm 1 vector ''v'',
then the functional ''a'' → (''av'',''v'') is a normal state. This construction can be reversed to give an action on
a Hilbert space from a normal state: this is the GNS construction for normal states.
Given an abstract separable factor, one can ask for a classification its modules, meaning the separable Hilbert spaces that it acts on. The answer is given as follows: every such module ''H'' can be given an ''M''-dimension dim''M''(''H'') (not its dimension as a complex vector space) such that modules are isomorphic if and only if they have the same dimension. The ''M''-dimension is additive, and a module is isomorphic to a subspace of another module if and only if it has smaller or equal ''M''-dimension.
A module is called 'standard' if it has a cyclic separating vector. Each factor has a standard representation, which is unique up to isomorphism. The standard representation has an antilinear involution ''J'' such that ''JMJ'' = ''M′''.
For finite factors the standard module is given by the GNS construction applied to the unique normal tracial state and the ''M''-dimension is normalized so that the standard module has ''M''-dimension 1, while for infinite factors the standard module is the module with ''M''-dimension equal to ∞.
The possible ''M''-dimensions of modules are given as follows:
★ Type I''n'' (''n'' finite): The ''M''-dimension can be any of 0/''n'', 1/''n'', 2/''n'', 3/''n'', ..., ∞. The standard module has ''M''-dimension 1 (and complex dimension ''n''2.)
★ Type I''∞'' The ''M''-dimension can be any of 0, 1, 2, 3, ..., ∞. The standard representation of ''B''(''H'') is ''H''⊗''H''; its ''M''-dimension is ∞.
★ Type II''1'': The ''M''-dimension can be anything in [0, ∞]. It is normalized so that the standard module has ''M''-dimension 1. The ''M''-dimension is also called the 'coupling constant' of the module ''H''.
★ Type II''∞'': The ''M''-dimension can be anything in [0, ∞]. There is in general no canonical way to normalize it; the factor may have outer automorphisms multiplying the ''M''-dimension by constants. The standard representation is the one with ''M''-dimension ∞.
★ Type III: The ''M''-dimension can be 0 or ∞. Any two non-zero modules are isomorphic, and all non-zero modules are standard.
Connes and others proved that the following conditions on a von Neumann algebra ''M''
on a separable Hilbert space ''H'' are all equivalent:
★ ''M'' is 'hyperfinite' or 'AFD' or 'approximately finite dimensional' or 'approximately finite': this means the algebra contains an ascending sequence of finite dimensional subalgebras with dense union. (Warning: some authors use "hyperfinite" to mean "AFD and finite".)
★ ''M'' is 'amenable': this means that the derivations of ''M'' with values in a normal dual Banach bimodule are all inner.
★ ''M'' has Schwartz's 'property P': for any bounded operator ''T'' on ''H'' the norm closed convex hull of the elements ''uTu
★ '' contains an element commuting with ''M''.
★ ''M'' is 'semidiscrete': this means the identity map from ''M'' to ''M'' is a weak pointwise limit of completely positive maps of finite rank.
★ ''M'' has 'property E' or the 'Hakeda-Tomiyama extension property': this means that there is a projection of norm 1 from bounded operators on ''H'' to ''M'' '.
★ ''M'' is 'injective': any completely positive linear map from any self adjoint closed subspace containing 1 of any unital C
★ -algebra ''A'' to ''M'' can be extended to a completely positive map from ''A'' to ''M''.
There is no generally accepted term for the class of algebras above; Connes has suggested that 'amenable' should be the standard term.
The amenable factors have been classified: there is a unique one of each of the types I''n'', I∞, II1, II∞, IIIλ,
for 0<λ≤ 1, and the ones of type III0 correspond to certain ergodic
flows. (For type III0 calling this a classification is a little misleading, as it is known that there is no easy way to classify the corresponding ergodic flows.)
All amenable factors can be constructed using the 'group-measure space construction' of Murray and von Neumann for a single ergodic transformation. In fact they are precisely the factors arising as crossed products by free ergodic actions of ''Z'' or ''Z''''n'' on abelian von Neumann algebras ''L''∞(''X''). Type I factors occur when the measure space ''X'' is atomic and the action transitive. When ''X'' is diffuse or non-atomic, it is equivalent to [0,1] as a measure space. Type II factors occur when ''X'' admits an equivalent finite (II1) or infinite (II∞,) measure, invariant under . Type III factors occur in the remaining cases where there is no invariant measure, but only an invariant measure class: these factors are called 'Kreiger factors'.
von Neumann algebras of type I are always amenable, but for the other types there are an uncountable number of different non-amenable factors, which seem very hard to classify, or even distinguish from each other. Nevertheless Voiculescu and Ozawa have shown that the class of non-amenable factors coming from the group-measure space construction is 'disjoint' from the class coming from group von Neumann algebras of free or hyperbolic groups.
The Hilbert space tensor product of two Hilbert spaces is the completion of their algebraic tensor product.
One can define a tensor product of von Neumann algebras (a completion of the algebraic tensor product of the algebras considered as rings), which is again a von Neumann algebra, and act on the tensor product of the corresponding Hilbert spaces. The tensor product of two finite algebras is finite, and the tensor product of an infinite algebra and a non-zero algebra is infinite. The type of the tensor product of two von Neumann algebras (I, II, or III) is the maximum of their types. The 'commutation theorem for tensor products' states that
:
(where ''M''′ denotes the commutant of ''M'').
The tensor product of an infinite number of von Neumann algebras, if done naively, is usually a ridiculously large non-separable algebra. Instead one usually chooses a state on each of the von Neumann algebras, uses this to define a state on the algebraic tensor product, which can be used to product a Hilbert space and a (reasonably small) von Neumann algebra. If all the factors are finite matrix algebras the factors are called 'Araki-Woods' factors or 'ITPFI factors' (ITPFI stands for "infinite tensor product of finite type I factors"). The type of the infinite tensor product can vary dramatically as the states are changed; for example, the infinite tensor product of an infinite number of type I2 factors can have any type depending on the choice of states. In particular Powers found an uncountable family of non-isomorphic hyperfinite type IIIλ factors for 0<λ<1, called 'Powers factors', by taking an infinite tensor product of
type I2 factors, each with the state given by :
All hyperfinite von Neumann algebras not of type III0 are isomorphic to Araki-Woods factors, but there are uncountably many of type III0 that are not.
A
'bimodule'
(or correspondence) is a Hilbert space ''H'' with module actions of two commuting von Neumann algebras. Bimodules have a much richer structure than that of modules. Any bimodule over two factors always gives a subfactor since one of the factors is always contained in the commutant of the other. There is also a subtle relative tensor product operation due to Connes on bimodules. The theory of subfactors, initiated by Vaughan Jones, reconciles these two seemingly different points of view.
Bimodules are also important for the von Neumann group algebra ''M'' of a discrete group . Indeed if ''V'' is any unitary representation of , then, regarding as the diagonal subgroup of x , the corresponding induced representation on ''l''2 (,V) is naturally a bimodule for two commuting copies of ''M''. Important representation theoretic properties of can be formulated entirely in terms of bimodules and therefore make sense for the von Neumann algebra itself. For example Connes and Jones gave a definition of an analogue of Kazhdan's Property T for von Neumann algebras in this way.
★ The essentially bounded functions on a σ-finite measure space form a commutative (type I1) von Neumann algebra acting on the ''L''2 functions. For certain non-σ-finite measure spaces, usually considered pathological, ''L''∞(''X'') is not a von Neumann algebra; for example, the σ-algebra of measurable sets might be the countable-cocountable algebra on an uncountable set.
★ The bounded operators on any Hilbert space form a von Neumann algebra, indeed a factor, of type I.
★ If we have any unitary representation of a group ''G'' on a Hilbert space ''H'' then the bounded operators commuting with ''G'' form a von Neumann algebra ''G''′, whose projections correspond exactly to the closed subspaces of ''H'' invariant under ''G'' . The double commutant ''G''′′ of ''G'' is also a von Neumann algebra.
★ The 'von Neumann group algebra' of a discrete group ''G'' is the algebra of all bounded operators on ''H'' = ''l''2(''G'') commuting with the action of ''G'' on ''H'' through right multiplication. One can show that this is the von Neumann algebra generated by the operators corresponding to multiplication from the left with an element g ∈ ''G''. It is a factor (of type II1) if every non-trivial conjugacy class of ''G'' is infinite (for example, a non-abelian free group), and is the hyperfinite factor of type II1 if in addition ''G'' is a union of finite subgroups (for example, the group of all permutations of the integers fixing all but a finite number of elements).
★ The tensor product of two von Neumann algebras, or of a countable number with states, is a von Neumann algebra as described in the section above.
★ The crossed product of a von Neumann algebra by a discrete (or more generally locally compact) group can be defined, and is a von Neumann algebra. Special cases are the 'group-measure space construction' of Murray and von Neumann and 'Krieger factors'.
★ The von Neumann algebras of a measurable equivalence relation and a measurable groupoid can be defined. These examples generalise von Neumann group algebras and the group-measure space construction.
★ By forgetting about the topology on a von Neumann algebra, we can consider it a (unital)
★ -algebra, or just a ring. Von Neumann algebras are semihereditary: every finitely generated submodule of a projective module is itself projective. There have been several attempts to axiomatize the underlying rings of von Neumann algebras, including Baer
★ -rings and AW
★ algebras.
★ The
★ -algebra of affiliated operators of a finite von Neumann algebra is a von Neumann regular ring. (The von Neumann algebra itself is in general not von Neumann regular.)
★ Von Neumann algebras have found applications in diverse areas of mathematics like knot theory, statistical mechanics, Quantum field theory, Local quantum physics, Free probability, Noncommutative geometry, representation theory, geometry, and probability.
★ B. Blackadar, ''Operator algebras'', ISBN 3-540-28486-9
★ A. Connes [ftp://ftp.alainconnes.org/book94bigpdf.pdf ''Non-commutative geometry''], ISBN 0-12-185860-X.
★ A. Connes, ''Classification of Injective Factors'' The Annals of Mathematics 2nd Ser., Vol. 104, No. 1 (Jul., 1976), pp. 73-115
★ J. Dixmier, ''Von Neumann algebras'', ISBN 0-444-86308-7 (A translation of ''Les algèbres d'opérateurs dans l'espace hilbertien: algèbres de von Neumann'' , Gauthier-Villars (1957)., the first book about von Neumann algebras.)
★ V.F.R.Jones von Neumann algebras; incomplete notes from a course.
★ S. Sakai, ''C
★ -algebras and W
★ -algebras'' , Springer (1971) ISBN 3-540-63633-1
★ Jacob Schwartz ''W-
★ Algebras'' ISBN 0-677-00670-5
★
★ M. Takesaki ''Theory of Operator Algebras I, II, III'' ISBN 3-540-42248-X ISBN 3-540-42914-X ISBN 3-540-42913-1
★ A. J. Wassermann, Operators on Hilbert space
★ J. von Neumann, Zur Algebra der Funktionaloperationen und Theorie der normalen Operatoren'', Math. Ann. 102 (1929) 370-427. The original paper on von Neumann algebras.
★ J. von Neumann On a Certain Topology for Rings of Operators The Annals of Mathematics 2nd Ser., Vol. 37, No. 1 (Jan., 1936), pp. 111-115. This defines the ultrastrong topology.
★ F.J. Murray, J. von Neumann, ''On rings of operators'' Ann. of Math. (2) , 37 (1936) pp. 116–229. This paper gives their basic properties and the division into types I, II, and III, and in particular finds factors not of type I.
★ F.J. Murray, J. von Neumann, ''On rings of operators II'' Trans. Amer. Math. Soc. , 41 (1937) pp. 208–248. This is a continuation of the previous paper, that studies properties of the trace of a factor.
★ J. von Neumann, On rings of operators III'' Ann. of Math. (2) , 41 (1940) pp. 94–161. This shows the existence of factors of type III.
★ F.J. Murray, J. von Neumann, ''On rings of operators IV'' Ann. of Math. (2) , 44 (1943) pp. 716–808. This studies when factors are isomorphic, and in particular shows that all approximately finite factors of type II1 are isomorphic.
★ J. von Neumann, ''On infinite direct products'' Compos. Math. , 6 (1938) pp. 1–77. This discusses infinite tensor products of Hilbert spaces and the algebras acting on them.
★ J. von Neumann, On Rings of Operators. Reduction Theory The Annals of Mathematics 2nd Ser., Vol. 50, No. 2 (Apr., 1949), pp. 401-485. This discusses how to write a von Neumann algebra as a sum or integral of factors.
★ J. von Neumann, On Some Algebraical Properties of Operator Rings The Annals of Mathematics 2nd Ser., Vol. 44, No. 4 (Oct., 1943), pp. 709-715. This shows that some apparently topological properties in von Neumann algebras can be defined purely algebraically.
★ Murray, F. J. ''The rings of operators papers''. The legacy of John von Neumann (Hempstead, NY, 1988), 57-60, Proc. Sympos. Pure Math., 50, Amer. Math. Soc., Providence, RI. ISBN 0-8218-4219-6 A historical account of the discovery of von Neumann algebras.
★ -algebra' is a
★ -algebra of bounded operators on a Hilbert space that is closed in the weak operator topology and contains the identity operator. They were originally introduced by John von Neumann, motivated by the study of single operators, group representations, ergodic theory and quantum mechanics. His double commutant theorem shows that the analytic definition is equivalent to a purely algebraic definition as an algebra of symmetries.
Two basic examples of von Neumann algebras are as follows. The ring ''L''∞('R') of essentially bounded measurable functions on the real line is a commutative von Neumann algebra, which acts by pointwise multiplication on the Hilbert space ''L''2('R') of square integrable functions. The algebra ''B''(''H'') of all bounded operators on a Hilbert space ''H'' is a von Neumann algebra, non-commutative if the Hilbert space has dimension at least 2.
von Neumann algebras, under the original name of 'rings of operators', were first studied by von Neumann in 1929; he and Francis Murray developed the basic theory in a series of papers starting in 1936.
Definitions
There are three common ways to define von Neumann algebras.
The first and most common way is to define them as weakly closed
★ algebras of bounded operators (on a Hilbert space) containing the identity. In this definition the weak (operator) topology can be replaced by almost any other common topology other than the norm topology,
in particular by the strong, ultrastrong or ultraweak operator topologies . (The
★ algebras of bounded operators that are closed in the norm topology are C
★ algebras, so in particular any von Neumann algebra is a
C
★ algebra.)
The second definition is that a von Neumann algebra is a subset of the bounded operators closed under
★ and equal to its double commutant, or equivalently the commutant of some subset closed under
★ . The
von Neumann double commutant theorem says that the first two definitions are equivalent.
The first two definitions define a von Neumann algebras concretely as a set of operators acting on some given Hilbert space. Von Neumann algebras can also be defined abstractly as C
★ algebras that have a predual; in other words the von Neumann algebra, considered as a Banach space, is the dual of some other Banach space called the predual. The predual of a von Neumann algebra is unique up to isomorphism.
Some authors use "von Neumann algebra" for the algebras together with a Hilbert space action, and "W
★ algebra" for the abstract concept, so a von Neumann algebra is a W
★ algebra together with a Hilbert space and a suitable faithful unital action on the Hilbert space. The concrete and abstract definitions of a von Neumann algebra are similar to the concrete and abstract definitions of a C
★ algebra, which can be defined either as norm-closed
★ algebras of operators on a Hilbert space, or as Banach
★ -algebras such that ||''a'' ''a
★ ''||=||''a''|| ||''a
★ ''||.
Terminology
Some of the terminology in von Neumann algebra theory can be confusing, and the terms often have different meanings outside the subject.
★ A 'finite' von Neumann algebra is one which is the direct integral of finite factors. Similarly, 'properly infinite' von Neumann algebras are the direct integral of properly infinite factors.
★ A von Neumann algebra that acts on a separable Hilbert space is called 'separable'. Note that such algebras are rarely separable in the norm topology.
★ The von Neumann algebra 'generated' by a set of bounded operators on a Hilbert space is the smallest von Neumann algebra containing all those operators.
★ The 'tensor product' of two von Neumann algebras acting on two Hilbert spaces is defined to be the von Neumann algebra generated by their algebraic tensor product, considered as operators on the Hilbert space tensor product of the Hilbert spaces.
Commutative von Neumann algebras
:''Main article: Abelian von Neumann algebra''
The relationship between commutative von Neumann algebras and measure spaces is analogous to that between commutative C
★ -algebras and locally compact Hausdorff spaces. Every commutative von Neumann algebra is isomorphic to ''L''∞(''X'') for some measure space (''X'', μ) and for every σ-finite measure space ''X'', conversely, ''L''∞(''X'') is a von Neumann algebra.
Due to this analogy, the theory of von Neumann algebras has been called noncommutative measure theory, while the theory of C
★ -algebras is sometimes called noncommutative topology.
Projections
Operators ''E'' in a von Neumann algebra for which ''E'' = ''EE'' = ''E
★ '' are called 'projections'; they are exactly the operators which give an orthogonal projection of ''H'' onto some closed subspace.
A subspace of the Hilbert space ''H'' is said to 'belong to' the von Neumann algebra ''M'' if it is the image of some projection in ''M''. Informally these are the closed subspaces that can be described using elements of ''M'', or that ''M'' "knows" about. The closure of the image of any operator in ''M'', or the kernel of any operator in ''M'' belong to ''M'', and the closure of the image of any subspace belonging to ''M'' under an operator of ''M'' also belongs to ''M''. There is a 1:1 correspondence between projections of ''M'' and subspaces that belong to it.
Two subspaces belonging to ''M'' are called ('Murray-von Neumann') 'equivalent' if there is a partial isometry mapping the first isomorphically onto the other that is an element of the von Neumann algebra (informally, if ''M'' "knows" that the subspaces are isomorphic). This induces a natural equivalence relation on projections by defining ''E'' to be equivalent to ''F'' if the corresponding subspaces are equivalent, or in other words if there is a partial isometry of ''H'' that maps the image of ''E'' isometrically to the image of ''F'' and is an element of the von Neumann algebra. Another way of stating this is that ''E'' is equivalent to ''F'' if ''E=uu
★ '' and ''F=u
★ u'' for some partial isometry ''u'' in ''M''.
The equivalence relation ~ thus defined is additive in the following sense: Suppose ''E''1 ~ ''F''1 and ''E''2 ~ ''F''2. If ''E''1 ⊥ ''E''2 and ''F''1 ⊥ ''F''2, then ''E''1 + ''E''2 ~ ''F''1 + ''F''2. This is not true in general if one requires unitary equivalence in the definition of ~, i.e. if we say ''E'' is equivalent to ''F'' if ''u
★ Eu'' = ''F'' for some unitary ''u''. .
The subspaces belonging to ''M'' are ordered by inclusion, and this induces a partial order ≤ of projections.
There is also a natural partial order on the set of ''equivalence classes'' of projections, induced by the partial order ≤ of projections. If ''M'' is a factor, ≤ is a total order on equivalence classes of projections, described in the section on traces below.
A projection (or subspace belonging to ''M'') ''E'' is said to be ''finite'' if there is no projection ''F'' < ''E'' that is equivalent to ''E''. For example, all finite-dimensional projections (or subspaces) are finite (since isometries between Hilbert spaces leave the dimension fixed), but the identity operator on an infinite-dimensional Hilbert space is not finite in the von Neumann algebra of all bounded operators on it, since it is isometrically isomorphic to a proper subset of itself. However it is possible for infinite dimensional subspaces to be finite.
Orthogonal projections are noncommutative analogues of indicator functions in ''L''∞('R'). ''L''∞('R') is the ||·||∞-closure of the subspace generated by the indicator functions. Similarly, a von Neumann algebra is generated by its projections; this is a consequence of the spectral theorem for self-adjoint operators.
Factors
A von Neumann algebra ''N'' whose center consists only of multiples of the identity operator is called a 'factor'. Every von Neumann algebra on a separable Hilbert space is isomorphic to a direct integral of factors. This decomposition is essentially unique. Thus, the problem of classifying isomorphism classes of von Neumann algebras on separable Hilbert spaces can be reduced to that of classifying isomorphism classes of factors.
Every factor has one of 3 types as described below.
The type classification can be extended to von Neumann algebras that are not factors, and a von Neumann algebra is of type X if it can be decomposed as a direct integral of type X factors; for example, every commutative von Neumann algebra has type I1. Every von Neumann algebra can be written
uniquely as a sum of von Neumann algebras of types I, II, and III.
There are several other ways to divide factors into classes that are sometimes used:
★ A factor is called 'discrete' (or occasionally 'tame') if it has type I, and 'continuous' (or occasionally 'wild') if it has type II or III.
★ A factor is called 'semifinite' if it has type I or II, and 'purely infinite' if it has type III.
★ A factor is called 'finite' if the projection 1 is finite and 'properly infinite' otherwise. Factors of types I and II may be either finite or properly infinite, but factors of type III are always properly infinite.
Type I factors
A factor is said to be of 'type I' if there is a minimal projection, i.e. a projection ''E'' such that there is no other projection ''F'' with 0 < F < E. Any factor of type I is isomorphic to the von Neumann algebra of ''all'' bounded operators on some Hilbert space; since there is one Hilbert space for every cardinal number, isomorphism classes of factors of type I correspond exactly to the cardinal numbers. Since many authors consider von Neumann algebras only on separable Hilbert spaces, it is customary to call the bounded operators on a Hilbert space of finite dimension ''n'' a factor of type In, and the bounded operators on a separable infinite-dimensional Hilbert space, a factor of type I∞.
Type II factors
A factor is said to be of 'type II' if there are non-zero finite projections, but every projection ''E'' can be halved in the sense that there are equivalent projections ''F'' and ''G'' such that ''E'' = ''F'' + ''G''. If the identity operator in a type II factor is finite, the factor is said to be of type II1; otherwise, it is said to be of type II∞. The best understood factors of type II are the hyperfinite type II1 factor and the hyperfinite type II∞ factor.
These are the unique hyperfinite factors of types II1 and II∞; there are an uncountable number of other
factors of these types that are the subject of intensive study.
A factor of type II1 has a unique finite tracial state,
and the set of traces of projections is [0,1].
A factor of type II∞ has a semifinite trace, unique up to
rescaling, and the set of traces of projections is [0,∞]. The set of real numbers λ such that there is an automorphism rescaling the trace by a factor of λ is called the 'fundamental group' of the type II∞ factor.
The tensor product of a factor of type II1 and an infinite
type I factor has type II∞, and conversely any factor of
type II∞ can be constructed like this. The 'fundamental group' of a type
II1 factor is defined to be the fundamental group of its tensor product with the infinite (separable) factor of type I. For many years it was an open problem to find a type II factor whose fundamental group was not the group of all positive reals, but Connes then showed that the von Neumann group algebra of a countable discrete group with Kazhdan's property T (the trivial representation is isolated in the dual space), such as SL3('Z'), has a countable fundamental group. Subsequently Sorin Popa showed that the fundamental group can be trivial for certain groups, including the semidirect product of 'Z'2 by SL2('Z').
An example of a type II1 factor is the von Neumann group algebra
of a countable infinite discrete group such that every non-trivial conjugacy class is infinite.
Dusa McDuff found an uncountable family of such groups with non-isomorphic von Neumann group algebras, thus showing the existence of uncountably many different separable type II1 factors.
Type III factors
Lastly, 'type III' factors are factors that do not contain any nonzero finite projections at all. Since the identity operator is always infinite in those factors, they were sometimes called type III∞ in the past, but recently that notation has been superseded by the notation IIIλ, where λ is a real number in the interval [0,1]. More precisely, if the Connes spectrum (of its modular group) is 1 then the factor is of type III0, if the Connes spectrum is all integral powers of λ for 0<λ<1, then the type is IIIλ, and if the Connes spectrum is all positive reals then the type is III1. (The Connes spectrum is a closed subgroup of the positive reals, so these are the only possibilities.) The only trace on type III factors takes value ∞ on all non-zero positive elements, and any two non-zero projections
are equivalent. At one time type III factors were considered to be intractable objects, but Tomita-Takesaki theory
has led to a good structure theory. In particular, any type III factor can be written in a canonical way as the crossed product of a type II∞ factor and the real numbers.
The predual
Any von Neumann algebra ''M'' has a 'predual' ''M''
★ , which is the Banach space of all ultraweakly continuous linear functionals on ''M''. As the name suggests, ''M'' is (as a Banach space) the dual of its predual. The predual is unique in the sense that any other Banach space whose dual is ''M'' is canonically isomorphic to ''M''
★ . As mentioned above, the existence of a predual characterizes von Neumann algebras among C
★ algebras.
The definition of the predual given above seems to depend on the choice of Hilbert space that ''M'' acts on, as this determines the ultraweak topology.
However the predual can also be defined without using the Hilbert space that ''M'' acts on, by defining it to be the space generated by all positive 'normal' linear functionals on ''M''.
(Here "normal" means that it preserves suprema when applied to increasing nets of self adjoint operators; or equivalently to increasing sequences of projections.)
The predual ''M''
★ is a closed subspace of the dual ''M''
★ (which consists of all norm-continuous linear functionals on ''M'') but is generally smaller. The proof that ''M''
★ is (usually) not the same as ''M''
★ is nonconstructive and uses the axiom of choice in an essential way; it is very hard to exhibit explicit elements of ''M''
★ that are not in ''M''
★ . For example, exotic positive linear forms on the von Neumann algebra ''l''∞ (''Z'') are given by free ultrafilters; they correspond to exotic
★ -homomorphisms into ''C'' and describe the Stone-Cech compactification of ''Z''.
Examples:
#The predual of the von Neumann algebra ''L''∞('R') of essentially bounded functions on 'R' is the Banach space ''L''1('R') of integrable functions.
#The predual of the von Neumann algebra ''B''(''H'') of bounded operators on a Hilbert space ''H'' is the Banach space of all trace class operators with the trace norm ||''A''||= Tr(|''A''|). The Banach space of trace class operators is itself the dual of the C
★ -algebra of compact operators (which is not a von Neumann algebra).
Weights, states, and traces.
★ A 'weight' ω on a von Neumann algebra is a linear map from the set of positive elements (those of the form ''aa
★ '') to [0,∞].
★ A 'positive linear functional' is a weight with ω(1) finite (or rather the extension of ω to the whole algebra by linearity).
★ A 'state' is a weight with ω(1)=1.
★ A 'trace' is a weight with ω(''aa
★ '')=ω(''a
★ a'') for all ''a''.
★ A 'tracial state' is a trace with ω(1)=1.
Any factor has a trace such that the trace of a non-zero projection is non-zero
and the trace of a projection is infinite if and only if the projection is infinite.
Such a trace is unique up to rescaling. For factors that are separable or finite, two projections are equivalent if and only if they have the same trace. The type of a factor can be read off from the possible values of this trace as follows:
★ Type In: 0, ''x'', 2''x'', ....,''nx'' for some positive ''x'' (usually normalized to be 1/''n'' or 1).
★ Type I∞: 0, ''x'', 2''x'', ....,∞ for some positive ''x'' (usually normalized to be 1).
★ Type II1: [0,''x''] for some positive ''x'' (usually normalized to be 1).
★ Type II∞: [0,∞].
★ Type III: 0,∞
If a von Neumann algebra acts on a Hilbert space containing a norm 1 vector ''v'',
then the functional ''a'' → (''av'',''v'') is a normal state. This construction can be reversed to give an action on
a Hilbert space from a normal state: this is the GNS construction for normal states.
Modules over a factor
Given an abstract separable factor, one can ask for a classification its modules, meaning the separable Hilbert spaces that it acts on. The answer is given as follows: every such module ''H'' can be given an ''M''-dimension dim''M''(''H'') (not its dimension as a complex vector space) such that modules are isomorphic if and only if they have the same dimension. The ''M''-dimension is additive, and a module is isomorphic to a subspace of another module if and only if it has smaller or equal ''M''-dimension.
A module is called 'standard' if it has a cyclic separating vector. Each factor has a standard representation, which is unique up to isomorphism. The standard representation has an antilinear involution ''J'' such that ''JMJ'' = ''M′''.
For finite factors the standard module is given by the GNS construction applied to the unique normal tracial state and the ''M''-dimension is normalized so that the standard module has ''M''-dimension 1, while for infinite factors the standard module is the module with ''M''-dimension equal to ∞.
The possible ''M''-dimensions of modules are given as follows:
★ Type I''n'' (''n'' finite): The ''M''-dimension can be any of 0/''n'', 1/''n'', 2/''n'', 3/''n'', ..., ∞. The standard module has ''M''-dimension 1 (and complex dimension ''n''2.)
★ Type I''∞'' The ''M''-dimension can be any of 0, 1, 2, 3, ..., ∞. The standard representation of ''B''(''H'') is ''H''⊗''H''; its ''M''-dimension is ∞.
★ Type II''1'': The ''M''-dimension can be anything in [0, ∞]. It is normalized so that the standard module has ''M''-dimension 1. The ''M''-dimension is also called the 'coupling constant' of the module ''H''.
★ Type II''∞'': The ''M''-dimension can be anything in [0, ∞]. There is in general no canonical way to normalize it; the factor may have outer automorphisms multiplying the ''M''-dimension by constants. The standard representation is the one with ''M''-dimension ∞.
★ Type III: The ''M''-dimension can be 0 or ∞. Any two non-zero modules are isomorphic, and all non-zero modules are standard.
Amenable von Neumann algebras
Connes and others proved that the following conditions on a von Neumann algebra ''M''
on a separable Hilbert space ''H'' are all equivalent:
★ ''M'' is 'hyperfinite' or 'AFD' or 'approximately finite dimensional' or 'approximately finite': this means the algebra contains an ascending sequence of finite dimensional subalgebras with dense union. (Warning: some authors use "hyperfinite" to mean "AFD and finite".)
★ ''M'' is 'amenable': this means that the derivations of ''M'' with values in a normal dual Banach bimodule are all inner.
★ ''M'' has Schwartz's 'property P': for any bounded operator ''T'' on ''H'' the norm closed convex hull of the elements ''uTu
★ '' contains an element commuting with ''M''.
★ ''M'' is 'semidiscrete': this means the identity map from ''M'' to ''M'' is a weak pointwise limit of completely positive maps of finite rank.
★ ''M'' has 'property E' or the 'Hakeda-Tomiyama extension property': this means that there is a projection of norm 1 from bounded operators on ''H'' to ''M'' '.
★ ''M'' is 'injective': any completely positive linear map from any self adjoint closed subspace containing 1 of any unital C
★ -algebra ''A'' to ''M'' can be extended to a completely positive map from ''A'' to ''M''.
There is no generally accepted term for the class of algebras above; Connes has suggested that 'amenable' should be the standard term.
The amenable factors have been classified: there is a unique one of each of the types I''n'', I∞, II1, II∞, IIIλ,
for 0<λ≤ 1, and the ones of type III0 correspond to certain ergodic
flows. (For type III0 calling this a classification is a little misleading, as it is known that there is no easy way to classify the corresponding ergodic flows.)
All amenable factors can be constructed using the 'group-measure space construction' of Murray and von Neumann for a single ergodic transformation. In fact they are precisely the factors arising as crossed products by free ergodic actions of ''Z'' or ''Z''''n'' on abelian von Neumann algebras ''L''∞(''X''). Type I factors occur when the measure space ''X'' is atomic and the action transitive. When ''X'' is diffuse or non-atomic, it is equivalent to [0,1] as a measure space. Type II factors occur when ''X'' admits an equivalent finite (II1) or infinite (II∞,) measure, invariant under . Type III factors occur in the remaining cases where there is no invariant measure, but only an invariant measure class: these factors are called 'Kreiger factors'.
von Neumann algebras of type I are always amenable, but for the other types there are an uncountable number of different non-amenable factors, which seem very hard to classify, or even distinguish from each other. Nevertheless Voiculescu and Ozawa have shown that the class of non-amenable factors coming from the group-measure space construction is 'disjoint' from the class coming from group von Neumann algebras of free or hyperbolic groups.
Tensor products of von Neumann algebras
The Hilbert space tensor product of two Hilbert spaces is the completion of their algebraic tensor product.
One can define a tensor product of von Neumann algebras (a completion of the algebraic tensor product of the algebras considered as rings), which is again a von Neumann algebra, and act on the tensor product of the corresponding Hilbert spaces. The tensor product of two finite algebras is finite, and the tensor product of an infinite algebra and a non-zero algebra is infinite. The type of the tensor product of two von Neumann algebras (I, II, or III) is the maximum of their types. The 'commutation theorem for tensor products' states that
:
(where ''M''′ denotes the commutant of ''M'').
The tensor product of an infinite number of von Neumann algebras, if done naively, is usually a ridiculously large non-separable algebra. Instead one usually chooses a state on each of the von Neumann algebras, uses this to define a state on the algebraic tensor product, which can be used to product a Hilbert space and a (reasonably small) von Neumann algebra. If all the factors are finite matrix algebras the factors are called 'Araki-Woods' factors or 'ITPFI factors' (ITPFI stands for "infinite tensor product of finite type I factors"). The type of the infinite tensor product can vary dramatically as the states are changed; for example, the infinite tensor product of an infinite number of type I2 factors can have any type depending on the choice of states. In particular Powers found an uncountable family of non-isomorphic hyperfinite type IIIλ factors for 0<λ<1, called 'Powers factors', by taking an infinite tensor product of
type I2 factors, each with the state given by :
All hyperfinite von Neumann algebras not of type III0 are isomorphic to Araki-Woods factors, but there are uncountably many of type III0 that are not.
Bimodules and subfactors
A
'bimodule'
(or correspondence) is a Hilbert space ''H'' with module actions of two commuting von Neumann algebras. Bimodules have a much richer structure than that of modules. Any bimodule over two factors always gives a subfactor since one of the factors is always contained in the commutant of the other. There is also a subtle relative tensor product operation due to Connes on bimodules. The theory of subfactors, initiated by Vaughan Jones, reconciles these two seemingly different points of view.
Bimodules are also important for the von Neumann group algebra ''M'' of a discrete group . Indeed if ''V'' is any unitary representation of , then, regarding as the diagonal subgroup of x , the corresponding induced representation on ''l''2 (,V) is naturally a bimodule for two commuting copies of ''M''. Important representation theoretic properties of can be formulated entirely in terms of bimodules and therefore make sense for the von Neumann algebra itself. For example Connes and Jones gave a definition of an analogue of Kazhdan's Property T for von Neumann algebras in this way.
Examples
★ The essentially bounded functions on a σ-finite measure space form a commutative (type I1) von Neumann algebra acting on the ''L''2 functions. For certain non-σ-finite measure spaces, usually considered pathological, ''L''∞(''X'') is not a von Neumann algebra; for example, the σ-algebra of measurable sets might be the countable-cocountable algebra on an uncountable set.
★ The bounded operators on any Hilbert space form a von Neumann algebra, indeed a factor, of type I.
★ If we have any unitary representation of a group ''G'' on a Hilbert space ''H'' then the bounded operators commuting with ''G'' form a von Neumann algebra ''G''′, whose projections correspond exactly to the closed subspaces of ''H'' invariant under ''G'' . The double commutant ''G''′′ of ''G'' is also a von Neumann algebra.
★ The 'von Neumann group algebra' of a discrete group ''G'' is the algebra of all bounded operators on ''H'' = ''l''2(''G'') commuting with the action of ''G'' on ''H'' through right multiplication. One can show that this is the von Neumann algebra generated by the operators corresponding to multiplication from the left with an element g ∈ ''G''. It is a factor (of type II1) if every non-trivial conjugacy class of ''G'' is infinite (for example, a non-abelian free group), and is the hyperfinite factor of type II1 if in addition ''G'' is a union of finite subgroups (for example, the group of all permutations of the integers fixing all but a finite number of elements).
★ The tensor product of two von Neumann algebras, or of a countable number with states, is a von Neumann algebra as described in the section above.
★ The crossed product of a von Neumann algebra by a discrete (or more generally locally compact) group can be defined, and is a von Neumann algebra. Special cases are the 'group-measure space construction' of Murray and von Neumann and 'Krieger factors'.
★ The von Neumann algebras of a measurable equivalence relation and a measurable groupoid can be defined. These examples generalise von Neumann group algebras and the group-measure space construction.
See also
★ By forgetting about the topology on a von Neumann algebra, we can consider it a (unital)
★ -algebra, or just a ring. Von Neumann algebras are semihereditary: every finitely generated submodule of a projective module is itself projective. There have been several attempts to axiomatize the underlying rings of von Neumann algebras, including Baer
★ -rings and AW
★ algebras.
★ The
★ -algebra of affiliated operators of a finite von Neumann algebra is a von Neumann regular ring. (The von Neumann algebra itself is in general not von Neumann regular.)
★ Von Neumann algebras have found applications in diverse areas of mathematics like knot theory, statistical mechanics, Quantum field theory, Local quantum physics, Free probability, Noncommutative geometry, representation theory, geometry, and probability.
References
★ B. Blackadar, ''Operator algebras'', ISBN 3-540-28486-9
★ A. Connes [ftp://ftp.alainconnes.org/book94bigpdf.pdf ''Non-commutative geometry''], ISBN 0-12-185860-X.
★ A. Connes, ''Classification of Injective Factors'' The Annals of Mathematics 2nd Ser., Vol. 104, No. 1 (Jul., 1976), pp. 73-115
★ J. Dixmier, ''Von Neumann algebras'', ISBN 0-444-86308-7 (A translation of ''Les algèbres d'opérateurs dans l'espace hilbertien: algèbres de von Neumann'' , Gauthier-Villars (1957)., the first book about von Neumann algebras.)
★ V.F.R.Jones von Neumann algebras; incomplete notes from a course.
★ S. Sakai, ''C
★ -algebras and W
★ -algebras'' , Springer (1971) ISBN 3-540-63633-1
★ Jacob Schwartz ''W-
★ Algebras'' ISBN 0-677-00670-5
★
★ M. Takesaki ''Theory of Operator Algebras I, II, III'' ISBN 3-540-42248-X ISBN 3-540-42914-X ISBN 3-540-42913-1
★ A. J. Wassermann, Operators on Hilbert space
Murray and von Neumann's papers
★ J. von Neumann, Zur Algebra der Funktionaloperationen und Theorie der normalen Operatoren'', Math. Ann. 102 (1929) 370-427. The original paper on von Neumann algebras.
★ J. von Neumann On a Certain Topology for Rings of Operators The Annals of Mathematics 2nd Ser., Vol. 37, No. 1 (Jan., 1936), pp. 111-115. This defines the ultrastrong topology.
★ F.J. Murray, J. von Neumann, ''On rings of operators'' Ann. of Math. (2) , 37 (1936) pp. 116–229. This paper gives their basic properties and the division into types I, II, and III, and in particular finds factors not of type I.
★ F.J. Murray, J. von Neumann, ''On rings of operators II'' Trans. Amer. Math. Soc. , 41 (1937) pp. 208–248. This is a continuation of the previous paper, that studies properties of the trace of a factor.
★ J. von Neumann, On rings of operators III'' Ann. of Math. (2) , 41 (1940) pp. 94–161. This shows the existence of factors of type III.
★ F.J. Murray, J. von Neumann, ''On rings of operators IV'' Ann. of Math. (2) , 44 (1943) pp. 716–808. This studies when factors are isomorphic, and in particular shows that all approximately finite factors of type II1 are isomorphic.
★ J. von Neumann, ''On infinite direct products'' Compos. Math. , 6 (1938) pp. 1–77. This discusses infinite tensor products of Hilbert spaces and the algebras acting on them.
★ J. von Neumann, On Rings of Operators. Reduction Theory The Annals of Mathematics 2nd Ser., Vol. 50, No. 2 (Apr., 1949), pp. 401-485. This discusses how to write a von Neumann algebra as a sum or integral of factors.
★ J. von Neumann, On Some Algebraical Properties of Operator Rings The Annals of Mathematics 2nd Ser., Vol. 44, No. 4 (Oct., 1943), pp. 709-715. This shows that some apparently topological properties in von Neumann algebras can be defined purely algebraically.
★ Murray, F. J. ''The rings of operators papers''. The legacy of John von Neumann (Hempstead, NY, 1988), 57-60, Proc. Sympos. Pure Math., 50, Amer. Math. Soc., Providence, RI. ISBN 0-8218-4219-6 A historical account of the discovery of von Neumann algebras.
This article provided by Wikipedia. To edit the contents of this article, click here for original source.
psst.. try this: add to faves
