ZIPPER

A 'zipper' (British English: 'zip fastener' or 'zip') is a popular device for temporarily joining two edges of fabric. It is used in clothing, luggage and other bags, sporting goods, camping gear (e.g., tents and sleeping bags), and other textiles.

Contents

Description

History of the zipper

Types

Manufacturing

See also

References

External Links

Patents

Description

The bulk of a zipper consists of two strips of fabric tape, each affixed to one of the two pieces to be joined, carrying tens or hundreds of specially shaped metal or plastic teeth. The slider, operated by hand, moves along the rows of teeth. Inside the slider is a Y-shaped channel that meshes together or separates the opposing rows of teeth, depending on the direction of its movement. The friction of the slider against the teeth causes a characteristic buzzing noise, which is probably the origin of the name ''zip''(''per''). The name also may have originated in the greater speed with which the two sides of a zipper can be joined or separated, compared to the time needed for fastening or undoing laces or buttons.
Some zippers have two slides, allowing variation in the opening's size and position. In most jackets and similar garments, the opening is closed entirely when one slide is at each end. In most baggages, the opening is closed entirely when the two slides are next to each other at any point along the zipper.
Zippers may:

★ increase the size of an opening to allow the passage of objects, as in the fly of trousers or in a pocket

★ join or separate two ends or sides of a single garment, as in the front of a jacket

★ attach or detach a separable part of the garment to or from another, as in the conversion between trousers and shorts or the connection / disconnection of a hood and a coat.

★ decorate an item.
A zipper costs very little, but if it fails, the garment may be unusable until the zipper is repaired or replaced. Problems often lie with the zipper slider, which may have bent upwards due to wear. If so, it can be easily repaired by pushing the slider downwards.

History of the zipper

The early device, the zipper, wasn't in the United States until 1851. Domertin's invention had no slider; instead a series of clasps slid freely along both edges and joined at each clasp holding the two sides of the triangle together at a pair of points along a triangle. The clasp was joined together by a string of silly pudding at first until the inventors sister Sarlieen Johnson found a way to join it together without using tape or silly pudding. It's name was the clothes closer clasp until they shortened it to just zipper.
The true zipper was the product of a series of incremental improvements over more than twenty years, by inventors and engineers associated with a sequence of companies that were the progenitors of it. They we culminated in 1914, of the "Hookless Fastener No. 2".
Initial versions of the zipper were based on the "hook and eye" principle, rather than on interlocking teeth, and tended to come apart easily. Some versions depended on constant pressure from one side of the joined fabric in order to hold together at all, which limited applications. In the 1891 version, the slider detached entirely from the zipper when not being used to open or close.
Together the siblings founded the first incarnation of what was to eventually become Talon Inc., in Chicago in 1894, as the Universal Fastener Company. The design deficiencies, combined with difficulties in getting the machinery needed for mass production to work, prevented the early devices from reaching market, which led to financial hardships for the company. This in turn led to a series of reorganizations and name changes, as well as relocations, first to Catasauqua, Pennsylvania; then to Elyria, Ohio; Hoboken, New Jersey; and finally Meadville, Pennsylvania.
Then they joined the company, then called the Automatic Hook and Eye Company, in Hoboken, in 1906. At that time the company's product, still based on hooks and eyes, was called the "C-curity Fastener". They developed an improved version of the C-curity, called the "Plako", but it too had a strong tendency to pull apart, and wasn't any more successful than the previous versions. Sundback finally solved the pulling-apart problem in 1913, with his invention of the first version of the zipper based on interlocking teeth, the "Hookless Fastener No. 1". That version, however, had a tendency to wear out quickly, and again was not a commercial success. Finally, in 1914 they developed another version based on interlocking teeth, the "Hookless No. 2", which solved the last remaining major design defect, and opened the way to commercial success.
The principle is, each tooth is punched to have a dimple on its bottom and a nib or conical projection on its top. The nib atop one tooth engages in the matching dimple in the bottom of the tooth that follows it on the other side as the two strips of teeth are brought together through the two Y channels of the slider. The teeth are crimped tightly to a strong fabric cord that is the selvage edge of the cloth tape that attaches the zipper to the garment, with the teeth on one side offset by half a tooth's height from those on the other side's tape. They are held so tightly to the cord and tape that once meshed there is not enough play to let them pull apart - - a tooth can't rise up off the nib below it enough to break free, and its nib on top can't drop out of the dimple in the tooth above it.
The classic zipper was made of a brass alloy, a metal that has low friction and is long-wearing.
Sundback's invention of the Hookless No. 2 took place while he was working for the Hookless Fastener Company in Meadville, which had previously been set up to manufacture the Hookless No. 1. Depending on which improvement one wants to consider to constitute the "invention" of the zipper, the zipper was invented either in Meadville, Chicago, or one of the other previously mentioned cities.
The B. F. Goodrich Company coined the name ''Zipper'' in 1923 for the line of rubber overshoes that it made using the fastener. The name slowly came to be associated with the fastener itself, and eventually acquired generic status.
The zipper slowly became popular for children's clothing and men's trousers in the 1920s and 1930s. In the early 1930s the haute couture designer Elsa Schiaparelli featured zippers in her avant-garde gowns, helping it to become acceptable in women's clothing. In 1934, Tadao Yoshida founded a company called San-S Shokai in downtown Tokyo. Later, this company would change its name to YKK and become the world's largest manufacturer of zippers and fastening products. By World War II, the zipper had become widely used in Europe and North America, and after the war quickly spread through the rest of the world.
Clergy in the 1920s and 1930s described zippers as allowing one to take one's clothes off too quickly, thus hastening illicit sexual activity. Clothing with zippers was seen as inappropriate to be worn by women because of this fact, and was not fully adopted until the late 1950s.
Today, such leading global companies as YKK, Opti, TALON, Ideal, NEO, KCC Group, and Tex Corp, make various types of zippers including "invisible" zippers, metallic zippers, and plastic zippers.
Recently invented is the Excoffier zipper, which possesses a new shape of zipper teeth.
In a January 2007 television show in Canada, the zipper was chosen as No. 8 on the list of The Greatest Canadian Inventions; it qualified because Sundback had been president of a Canadian-based company that was one of the earliest manufacturers of the zipper.
Further information about the history of the zip fastener you receive here: History of Zips and Opti

Types

★ 'Coil' zippers now form the bulk of sales of zippers world-wide. The slider runs on two coils on each side; the "teeth" are the coils. Two basic types of coils are used: one with coils in spiral form, usually with a cord running inside the coils; the other with coils in ladder form, also called the Ruhrmann type. This second type is now used only in a few parts of the world, mainly in South Asia.
Coil zippers are made of polyester coil and are thus also known as polyester zippers. Nylon was formerly used and though only polyester is used now, the type is still known as a nylon zipper.

★ 'Invisible' zippers' teeth are behind the tape. The tape's color matches the garment's, as does the slider, so that, except the slider, the zipper is "invisible". This kind of a zipper is common in skirts and dresses. Invisible zippers are usually coil zippers or to be precise polyester zipper.

★ 'Metallic' zippers are the classic zipper type, found mostly in jeans today. The teeth are not a coil, but are individual pieces of metal moulded into shape and set on the zipper tape at regular intervals.
Metal zippers are made in brass, aluminium and nickel, according to the metal used for teeth making. All these zippers are basically made from flat wire.
A special type of metal zipper is made from pre-formed wire, usually brass but sometimes other metals too. Only a few companies in the world have the technology. These type of pre-formed metal zippers are mainly used in high grade jeanswear, workwear, etc., where high strength is required and zippers need to withstand tough washing.

★ 'Plastic-molded' zippers are identical to metallic zippers, except that the teeth are plastic instead of metal. Metal zippers can be painted to match the surrounding fabric, plastic zippers can be made in any color of plastic. Plastic zippers mostly use polyacetal resin though other resins are used too like polyethylene.

★ 'Open-ended' zippers use a "box and pin" mechanism to lock the two sides of the zipper into place, often in jackets. Open-ended zippers can be of any of the above specified types.

★ 'Closed-ended' zippers are closed at both ends; they are often used in baggage.
For further information and images about the types and components of a zipper click here: The ABC of zip fasteners You will see the basic models and types of the zipper, all components and the right length definitions.

Manufacturing

Japan makes 68% of the world's zippers. A large part of these are manufactured by YKK. Almost all of the rest are made in Southeast Asia. Major zipper manufacturing countries in Southeast Asia are now Bangladesh, China and India. These countries are not only manufacturing zippers for domestic use and use in exported products but are exporting zippers directly to other countries as well.
TALON still exists as an American brand, now owned by TagIt Pacific of USA.Tag It recently changed it name to Talon International Inc.

See also

★ Buckle

★ Button

★ Rack and pinion

★ Safety pin

★ Shoelaces

★ Snap fasteners (also known as ''poppers'' and ''press studs'')

★ Tex Corp

★ Velcro

★ YKK Group

★

★ NEO

★ Zips from Coats Opti

References

★ Henry Petroski: ''The Evolution of Useful Things'' (1992); ISBN 0-679-74039-2

★ Robert Friedel: ''Zipper: An Exploration in Novelty'' (W. W. Norton and Company: New York, 1996); ISBN 0-393-31365-4

External Links

Zipper! - With Good Reason by VFH Radio Robert Friedel and Alexander Horniman (University of Virgina) examine how the zipper illustrates the limitations and expectations of technology.

Patents

★ : "Fastening for Garments & c."

★ : "Shoe fastening"

★ : "Clasp Locker or Unlocker for Shoes"

★ : "Fastening for Shoes"

★ : "Clasp-Locker for Shoes"

★ : "Separable fastener"

★ : "Separable fastener"

★ : "Slider"