العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
Español
Title:
Pitbull Clamp ripout test
Description:
3/4 x 3/4 x 2" 1018 steel milled down to 1/8 thick in 12 seconds using just one 832-ts-01 clamp!
Author:
pd4104gmbus
Tags:
CNC, Milling, Fixture, low, profile, clamping, Clamp, Pitbull, machining, Machine, production,
Pitbull Clamp ripout test
Description:
3/4 x 3/4 x 2" 1018 steel milled down to 1/8 thick in 12 seconds using just one 832-ts-01 clamp!
Author:
pd4104gmbus
Tags:
CNC, Milling, Fixture, low, profile, clamping, Clamp, Pitbull, machining, Machine, production,
Popular searches: Cuba, Scuba Diving, Skydiving, Dubai, Niagara Falls, Rainforest, Surfing, Snowboarding, Sandboarding, Pyramids, Everest, Stonehenge, Bear Grylls
Related Videos:
 | CNC Toolholder "powRgrip®" Clamping System The clamping system PGR powrgrip® is a mechanical alternative to thermal shrink-fit and hydro-expansion chucks, and is suitable for the clamping of both solid carbide and HSS tools. As opposed to shrink-fit technology, there are no heat-related structural changes on the tool holder. The PGR system permits safe clamping in tolerance h9 (type PGR-GB) or h6 (type PGR) and shows extraordinary performance in the enormous torques it can transfer, as well as in its excellent concentricity ... |
 | Vacuum Chuck HOW-TO Illustrates one of the many ways to use a NEMI vacuum chuck. |
 | Blick Industries Back Splash Clamp System Specialized clamping system for making back splashes and other narrow parts such as moldings, window sills and thresholds on your CNC machine. Requires 2 compressed air lines and one vacuum line. |
 | kx1 cnc milling vise clamp in 1018 steel milling a vise clamp down on a novakon nm-070 / sieg kx1. this is the 4th one on the block. the tool has gotton noisy, i think its becoming dull at this point, the finish is slighly worse than the previous ones. feeds rates in the slotting operation is 5ipm, the climb milling is 10ipm. the plunging of the hole is a very conservative 1ipm (really should be done with a drill bit). the bit is a 2 flute carbide 1/4", running at 5000rpm (327sfm). no coolant other than a quick shot at the end of ... |
 | X3 sieg / black and red X3 converted to 2axis cnc milling first runs of X3 converted milling machine. all the addaptions are homemade. including software on computer and stepperboard pcb, dro pcb etc etc. it uses absolute readings from chinese dro scales. it mills with accuracy of 0.05mm now. i can improve this later with software but this is accurate enough for now. |
 | RepRap extruder clamp milled hydraraptor mills a reprap part. hydraraptor.blogspot.com |
 | Super X3 with 4th axis Cutting 1/3rd scale harley Crank case One of our Customers Cutting out a Motorcycle crankcase on his Super X3 with a 4th axis |
 | second cnc part woot! second part i ran on my finally working x3 cnc milling machine! code was created on dolphin |
 | X2 MiniMill at high rpm Using a harrisson belt kit and a KBLC controler board. On a Sieg mini mill. |
 | Diamond 12 Factory Spy Video A spy video from the factory that produces the Diamond 12. The Diamond 12 is a very compact 12mm Swiss-type lathe that has a footprint of only 4' x 3'. In this video, it's cutting a ring like part which is caught by an optional parts catcher when the cutting has completed. |
Popular searches: Cuba, Scuba Diving, Skydiving, Dubai, Niagara Falls, Rainforest, Surfing, Snowboarding, Sandboarding, Pyramids, Everest, Stonehenge, Bear Grylls
