العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
EspañolRotary Gear Hob Machines #2816
Title:
Rotary Gear Hob Machines #2816
Description:
http://www.kaste.com/gearmach/2816.htm Rotary Gear Hob Machines, Stock Number: 2816 Pfauter P 630 R Age: 1980 *** THE MACHINES ARE SET UP FOR CUTTING ROTORS*** Capacities Maximum pitch in steel with a tensile strength of Approx. 38 tons/sq. in D.P. 2.5 Spur Gears - Maximum workpiece diameter 24.8" - Maximum axial slide travel 23.6" Minimum number of teeth (double-start index drive) 2 Maximum number of teeth to be cut: 48 Specifications Work Table diameter 21.65" Table recess Diameter 8.35", Depth 3.35" Maximum hob dimensions Diameter 12", Length 13" Diameter of hob arbors a) mm 60, 80, 100 Center distance between hob and workpiece Minimum 2", Maximum 14.7" Taper for hop arbors Morse No. 6 Tangential Slide - B4 exchanging the hob spacers to move the hob to a different location Speeds and Feeds Hob Speed rpm 21 to 115 Axial Feed in./wr. .014 to .240 - - Radial feed in./wr. .004 to .070 Electrical Standard Equipment Voltage V 230/460, Frequency cps 60, Connected load of the machine approx. kVA 28.5 Weight & Space 20,000 lbs (including space required to remove) Length 240.5" Width 153" Height 146.65" Equipped With: Designed for Higher table speed with a lower number of teeth Hob head designed for High power and low speed - 115rpm Some Manual Hob shift, but not by power Machines configured for hobbing No Crowning, no double cut, no skip cycle Radial & Axial feed - 1 cut cycle only With Differential & Dwell Extra long tailstock and column Coolant Tank, Chip Conveyor, Misc.tooling Kaste Industrial Machine Sales Inc. 1654 King St., Suite 7 Enfield, CT 06082 860-623-5700 860-654-0548 sales@kaste.com http://www.kaste.com
Author:
kasteindustrial
Tags:
Rotary, Gear, Hob, Machines, #2816,
Rotary Gear Hob Machines #2816
Description:
http://www.kaste.com/gearmach/2816.htm Rotary Gear Hob Machines, Stock Number: 2816 Pfauter P 630 R Age: 1980 *** THE MACHINES ARE SET UP FOR CUTTING ROTORS*** Capacities Maximum pitch in steel with a tensile strength of Approx. 38 tons/sq. in D.P. 2.5 Spur Gears - Maximum workpiece diameter 24.8" - Maximum axial slide travel 23.6" Minimum number of teeth (double-start index drive) 2 Maximum number of teeth to be cut: 48 Specifications Work Table diameter 21.65" Table recess Diameter 8.35", Depth 3.35" Maximum hob dimensions Diameter 12", Length 13" Diameter of hob arbors a) mm 60, 80, 100 Center distance between hob and workpiece Minimum 2", Maximum 14.7" Taper for hop arbors Morse No. 6 Tangential Slide - B4 exchanging the hob spacers to move the hob to a different location Speeds and Feeds Hob Speed rpm 21 to 115 Axial Feed in./wr. .014 to .240 - - Radial feed in./wr. .004 to .070 Electrical Standard Equipment Voltage V 230/460, Frequency cps 60, Connected load of the machine approx. kVA 28.5 Weight & Space 20,000 lbs (including space required to remove) Length 240.5" Width 153" Height 146.65" Equipped With: Designed for Higher table speed with a lower number of teeth Hob head designed for High power and low speed - 115rpm Some Manual Hob shift, but not by power Machines configured for hobbing No Crowning, no double cut, no skip cycle Radial & Axial feed - 1 cut cycle only With Differential & Dwell Extra long tailstock and column Coolant Tank, Chip Conveyor, Misc.tooling Kaste Industrial Machine Sales Inc. 1654 King St., Suite 7 Enfield, CT 06082 860-623-5700 860-654-0548 sales@kaste.com http://www.kaste.com
Author:
kasteindustrial
Tags:
Rotary, Gear, Hob, Machines, #2816,
Popular searches: Cuba, Scuba Diving, Skydiving, Dubai, Niagara Falls, Rainforest, Surfing, Snowboarding, Sandboarding, Pyramids, Everest, Stonehenge, Bear Grylls
Related Videos:
 | Fresado de engranajes Fresado de engranajes helicoidales en una creadora Modul 800 |
 | straight bevel gears finishing |
 | GEAR HOBBING M20/32 CITIZEN CINCOM GEAR HOBBING ON A M32 CITIZEN SWISS LATHE, SCREW MACHINE |
 | Gear Cutting Gear hobbing a 4/8DP, 55 teeth spline on a shaft 400mm OD X 1200 long. Material 4340 H/T 35Rc. |
 | Part 3: The Installation of Bevel Gears 3 - Informational video from Arrow Gear Company on the proper methods for installing bevel gears in a gearbox. |
 | gear hobber gear hobber |
 | Maag SH450/500S Heavy Duty Gear Cutting Machine. Ball Screw Driven Ram. Maximum Dia External Gears 5062mm. Minimum Dia 528mm. For External, Internal, Double Helical Gears & Gear Racks. Infinitely Variable Helix Angle. |
 | Gleason P90 Gear Hobber Gleason P90 Gear Hobber |
 | processing of pure rolling Cycloid gear wheel.摆线齿轮准纯滚动啮合过程 Abstract: After long periods of exploration of the cycloids, we found the regular pattern of cycloidal normal movement, which has worked out the mutual conjugates of hypocycloid, epicycloids and horizontal cycloid. Thus, the transmission of pure rolling mesh in cycloidal gear has been discovered, therefore, it also established the equation of normal line, the equidistance curve and curvature radius. This paper aims to discuss in detail of internal and external meshing in cycloidal gear, and ... |
 | Pfauter Gear Machine Pa 300 Frezadora Pa 300 |
Popular searches: Cuba, Scuba Diving, Skydiving, Dubai, Niagara Falls, Rainforest, Surfing, Snowboarding, Sandboarding, Pyramids, Everest, Stonehenge, Bear Grylls
