العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
Español2007 TRUMPF TRUBEND 5320 HYDRAULIC CNC PRESS BRAKE WITH TASC 6000 CNC CONTROL
Title:
2007 TRUMPF TRUBEND 5320 HYDRAULIC CNC PRESS BRAKE WITH TASC 6000 CNC CONTROL
Description:
http://www.actionmachinery.com/writeups/18331.htm 2007 TRUMPF TRUBEND 5320 HYDRAULIC CNC PRESS BRAKE WITH TASC 6000 CNC CONTROL, 14'5" X 353 TON DK-18331# S/N B0509A0073 Specifications Press Force: 353 Tons Stroke: 17.5" Effective Installation Height: 24" Inclination Of Beam: +/- 0.4" Bending Length: 174" Width Between Columns: 145" Throat: 16.5" Bed Width: 8" Operating Height: 41" Gauge Area In X, Max.: 34/39" Travel Path X Axis: 23.5" Speed Of Travel In X, Max.: 2,362 Ipm Travel Path R Axis: 10" Speed Of Travel In R, Max.: 780 Ipm Speed Of Travel In Z, Max.: 2,362 Ipm Y-Rapid Traverse: 520 Ipm Y-Working Cycle: 0.24 24 Ipm Y-Return Traverse: 520 Ipm Drive Motor: 30 Kw Oil Capacity, Approx.: 111 Gal. Weight, Approx.: 50,265 Lbs Dimensions: 209" L X 77" D X 126" H Connected Load: 50 Kva Electrics: 480v, 3 Ph, 60 Cycle 6-Axis Backgauge Specifications Traverse Distance X1 / X2 Axis: 24" R1 / R2 Axis: 9.8" Z1 / Z2 Axis - 6-Axis: 129" Maximum Range Before Stop In X Direction: 33.9" In Z Direction - 6-Axis: 136" Speeds X1 / X2 Axis: 39.4 In. Per Sec. R1 / R2 Axis: 13 In. Per Sec. Z1 / Z2 Axis: 39.4 In. Per Sec. Equipped With Tasc 6000 Cnc Control With 15" Monitor 6-Axis Backgauge X1, X2, Z1, Z2, R1, R2 Lower & Upper Hydraulic Tool Clamping Cnc Crowning Cnc L Axis Additional Foot Switch Bendmaster Prep Bending Aids (2) Parking Area 900mm X-Extension Bendguard Laser System Extended Open Heights Miscellaneous Segmented Tooling Trutops V1.2.2.0 (5.4) Software Note: There Is A Software Disc, But We Make No Representation As To It's Functionality. If Relicensing Fees Apply, It IsThe Responsibility Of The Buyer) Kim Khoury, CEA Action Machinery Co., Inc. 2320 Highland Ave Bethlehem PA 18020610-691-6677 (p) 610-694-0944 (f) kkhoury@actionmachinery.com
Author:
actionmachinery
Tags:
2007, TRUMPF, TRUBEND, 5320, HYDRAULIC, CNC, PRESS, BRAKE, WITH, TASC, 6000, CONTROL,
2007 TRUMPF TRUBEND 5320 HYDRAULIC CNC PRESS BRAKE WITH TASC 6000 CNC CONTROL
Description:
http://www.actionmachinery.com/writeups/18331.htm 2007 TRUMPF TRUBEND 5320 HYDRAULIC CNC PRESS BRAKE WITH TASC 6000 CNC CONTROL, 14'5" X 353 TON DK-18331# S/N B0509A0073 Specifications Press Force: 353 Tons Stroke: 17.5" Effective Installation Height: 24" Inclination Of Beam: +/- 0.4" Bending Length: 174" Width Between Columns: 145" Throat: 16.5" Bed Width: 8" Operating Height: 41" Gauge Area In X, Max.: 34/39" Travel Path X Axis: 23.5" Speed Of Travel In X, Max.: 2,362 Ipm Travel Path R Axis: 10" Speed Of Travel In R, Max.: 780 Ipm Speed Of Travel In Z, Max.: 2,362 Ipm Y-Rapid Traverse: 520 Ipm Y-Working Cycle: 0.24 24 Ipm Y-Return Traverse: 520 Ipm Drive Motor: 30 Kw Oil Capacity, Approx.: 111 Gal. Weight, Approx.: 50,265 Lbs Dimensions: 209" L X 77" D X 126" H Connected Load: 50 Kva Electrics: 480v, 3 Ph, 60 Cycle 6-Axis Backgauge Specifications Traverse Distance X1 / X2 Axis: 24" R1 / R2 Axis: 9.8" Z1 / Z2 Axis - 6-Axis: 129" Maximum Range Before Stop In X Direction: 33.9" In Z Direction - 6-Axis: 136" Speeds X1 / X2 Axis: 39.4 In. Per Sec. R1 / R2 Axis: 13 In. Per Sec. Z1 / Z2 Axis: 39.4 In. Per Sec. Equipped With Tasc 6000 Cnc Control With 15" Monitor 6-Axis Backgauge X1, X2, Z1, Z2, R1, R2 Lower & Upper Hydraulic Tool Clamping Cnc Crowning Cnc L Axis Additional Foot Switch Bendmaster Prep Bending Aids (2) Parking Area 900mm X-Extension Bendguard Laser System Extended Open Heights Miscellaneous Segmented Tooling Trutops V1.2.2.0 (5.4) Software Note: There Is A Software Disc, But We Make No Representation As To It's Functionality. If Relicensing Fees Apply, It IsThe Responsibility Of The Buyer) Kim Khoury, CEA Action Machinery Co., Inc. 2320 Highland Ave Bethlehem PA 18020610-691-6677 (p) 610-694-0944 (f) kkhoury@actionmachinery.com
Author:
actionmachinery
Tags:
2007, TRUMPF, TRUBEND, 5320, HYDRAULIC, CNC, PRESS, BRAKE, WITH, TASC, 6000, CONTROL,
Popular searches: Cuba, Scuba Diving, Skydiving, Dubai, Niagara Falls, Rainforest, Surfing, Snowboarding, Sandboarding, Pyramids, Everest, Stonehenge, Bear Grylls
Related Videos:
 | Trumpf Bendmaster New Machine at Crystal Spring Hog Equipment |
 | Trumpf TruBend 8000 For all manufacturers whose parts have extreme lengths, heights, or sheet thickness, this machine series is the solution, because special requirements are the bread and butter of our cooperation partner, EHT. For more information visit www.headland.com.au or www.industryexchange.com.au. |
 | 22 Ton Trumpf CNC Punch And Contour Machine 22 Ton Trumpf TC2020-R, Siemans PC CNC, 50" x 100" Trvl., 420 SPM, Auto Load/Unloader, 2002 REF #17975 |
 | Ballistic Fabrication 30 second commercial CNC Laser cutting, CNC press forming, CNC turning, CNC Milling, all performed at Ballistic Fabrication in Tucson AZ. |
 | Laser Ablation (TRUMPF) trumpf's laser showing fast ablation of a metalic layer over glass |
 | Pitbull Clamp ripout test 3/4 x 3/4 x 2" 1018 steel milled down to 1/8 thick in 12 seconds using just one 832-ts-01 clamp! |
 | Putting Zmax in my car Don't worry it won't overfill the oil level. |
 | CNC Press Brake doing fabrication Take a difficult part, un-fold to the flat, now cut the blank and re-fold the part in 1:00 minute. Douglas Metals, Inc., we take difficult parts and make them look easy. We can do the same for your parts. www.douglas-metals.com |
 | 2004 PRIMELINE MODEL 45X6 CNC HYDRAULIC PRESS BRAKE, 6' X 45 TON www.actionmachinery.com 2004 PRIMELINE MODEL 45X6 CNC HYDRAULIC PRESS BRAKE, 6' X 45 TON JV-18326TK* S/N 7244 Specifications Capacity: 45 Tons Bending Capacity, Mild Steel: 80" X 14 Ga. Bed & Ram Overall: 82" Clearance Through Housings: 63" Stroke Length, Adjustable: 5.5" Open Height, Without Tooling: 14" Closed Height: 8.5" Throat Depth: 12.2" Adjustable Speed Control Approach: 3.9 Ips Working: .5 Ips Return: 2.8 Ips Weight, Approx.: 5000 Lbs Dimensions, Approx: 85" LR X 45" FB X 80" H ... |
 | Lasercombi Trumpf Trumatic 7000 tijdens EuroBlech 2008 in Hannover Trumpf lasercombi met extra assen Een noviteit van Trumpf onlangs tijdens de plaatbeurs euroblech 2008 in Hannover (D) was de nieuwe lasercombimachine Trumatic 7000. Dit is de opvolger van de Trumatic 6000. Opmerkelijk aan deze machine is de actieve ondermatrijs. Zie ook: www.metaalmagazine.nl |
Popular searches: Cuba, Scuba Diving, Skydiving, Dubai, Niagara Falls, Rainforest, Surfing, Snowboarding, Sandboarding, Pyramids, Everest, Stonehenge, Bear Grylls
