العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
Español
Title:
Diamond 20CSB Swiss-Type CNC Lathe - Brass Pagoda
Description:
The Diamond 20CSB Swiss-type lathe cutting, rigid tapping, engraving, and threading brass into a pagoda complete in one setup. Includes subspindle cutoff operation.
Author:
CubicMachinery
Tags:
swiss-type, cnc, c-axis, subspindle, mechanics,
Diamond 20CSB Swiss-Type CNC Lathe - Brass Pagoda
Description:
The Diamond 20CSB Swiss-type lathe cutting, rigid tapping, engraving, and threading brass into a pagoda complete in one setup. Includes subspindle cutoff operation.
Author:
CubicMachinery
Tags:
swiss-type, cnc, c-axis, subspindle, mechanics,
Popular searches: Cuba, Scuba Diving, Skydiving, Dubai, Niagara Falls, Rainforest, Surfing, Snowboarding, Sandboarding, Pyramids, Everest, Stonehenge, Bear Grylls
Related Videos:
 | Big Engine Lathe-2 Machineing on our 52" Swing Engine Lathe |
 | Diamond 42CSL 10-Axis Swiss-Type Lathe Factory Spy Video The Diamond 42CSL is a huge 42mm, 10-axis Swiss-type lathe that's capable of very complex operations on large parts. This machine has Dual-Y capabilities that allow for the two tools to be cutting the same workpiece simultaneously. The 12-station VDI turret is capable of holding up to 4 B-Axis units. Each B-Axis unit can rotate a complete 360 degrees and allow for complex 5-axis (X,Y,Z,C,B) contouring operations. The video is a sneak peek straight from the factory floor. |
 | CNC Lathe (UA Project) ME 383 CNC Lathe Processes of Chess Piece |
 | Diamond 20CS Factory Spy Video - Long Part The Diamond 20CS Swiss-type lathe cuts and engraves a long brass part. The Diamond 20CS can machine parts up to 9.8" in length per chucking and has a programmable C-axis with a degree of 0.001 degrees. This demo shows off the machine's ability to do simultaneous Z and C-axis cutting on a long part. |
 | Harrison M300/Anilam Crusader CNC lathe A video of a Harrison M300 lathe fitted with the Anilam Crusader 2L controller. Manufactured in 1985 it still works very well and makes parts to tolerance without any difficulties. The Crusader controller like all Anilam controllers was very advanced for its time and is easy to programme. 60 lines of code produced this part with only using the G84 canned cycle for the thread cutting. |
 | Tsugami BH20 CNC Swiss Lathe This video features the new Tsugami BH20 CNC Swiss type automatic CNC lathe. The machine features a three path Fanuc control, a gang tool slide, a 12 station turret, and a two axis sub spindle with a backworking tool post. The machine has live tooling and Y axes on both the gang slide and turret. Three tools can cut simultaneously. The turret can also move independently in the Z-axis. This machine can be switched over and run without a guide bushing. The main and sub spindles are integral ... |
 | Slater Tools Swiss Type Rotary Broach Tool Holder Rotary Broaching, also called hex broaching or wobble broaching, uses a precision tool to produce an internal form inside a pre-drilled hole. In this video you will see Slater Tool's 0700 series Swiss Type Adjustment Free Rotary Broaching Tool Holder with a 3/8" hexagon rotary broach. The tool holder features a half inch tool bore for use in larger swiss type machines and is manufactured with the same quality and reliability as the thousands of Slater tool holders already in use throughout ... |
 | Emco Maier PCTurn-55 CNC Lathe Threading Demo Emco Maier pcturn-55 CNC Lathe Using FANUC 0T Software, Machining a Spindle with 1/2x20 Thread |
 | CNC Lathe - Turning a Chess Rook by Glacern Machine Tools www.glacern.com http Glacern Machine Tools Turning a rook chess piece out of 2.5" diameter 6061 aluminum bar stock on a Mori Seiki NL2500SY-700 CNC Turning Center, utilizing the Y-axis, C-axis, and live tooling. |
 | CNC machine As title says |
Popular searches: Cuba, Scuba Diving, Skydiving, Dubai, Niagara Falls, Rainforest, Surfing, Snowboarding, Sandboarding, Pyramids, Everest, Stonehenge, Bear Grylls
