العربية
中国
Français
Deutsch
Ελληνική
हिन्दी
Italiano
日本語
Português
Русский
Español
Title:
Rhino logo cnc cut
Description:
First CNC cut on my mill.Machine uses THK ballscrews and servo motors.Servo drivers are G320 from Gecko Drive inc.
Author:
tubosolinas
Tags:
cnc, machine, cut, cam, engineering,
Rhino logo cnc cut
Description:
First CNC cut on my mill.Machine uses THK ballscrews and servo motors.Servo drivers are G320 from Gecko Drive inc.
Author:
tubosolinas
Tags:
cnc, machine, cut, cam, engineering,
Popular searches: Cuba, Scuba Diving, Skydiving, Dubai, Niagara Falls, Rainforest, Surfing, Snowboarding, Sandboarding, Pyramids, Everest, Stonehenge, Bear Grylls
Related Videos:
 | Flycutting aluminum This is a process of flycutting an aluminum plate to make it flat |
 | Gecko powered printer Run test of combining a G320 Servo drive with a printer head. |
 | Take2 A week later and added a Z axis. Also put a frame around it in an effort to stabilize the pen. |
 | My first CNC cut First cut with my cnc router - Feedrate was a bit fast but slowed it down for the second cut which came out better. |
 | 3-axis CNC servo-drive XYZ servo-driver w/ Gecko G320 drives and Mach2 software .....installed on cnc mill and engraving plastic |
 | Graveuse CNC 3 axes gravure Graveuse CNC 3 axes gravure |
 | Avon2200 with Mach3 Avon2200 Circa 1989, with SEM servos, refitted with Norwin analogue drives, pixies, G100 and Mach3 |
 | 7x12 CNC mini lathe cutting 3/8" 24 tpi threads in Stainless Steel Groen Kettle Handle repair My Speedway version of the 7x12 Seig mini lathe converted to CNC. Plans for the conversion available here: www.stirlingsteele.com Here I am repairing some Groen kettle handles by turning new OD, and re-threading 3 24 TPI. |
 | CNC Machining Face/ End mill operations with a CNC converted Opti BF20 mill. This machine has ballscrews driven by stepper motors and a vector-drive VFD for the spindle. -JMI80 |
 | bridgeport cnc knee z axis My Bridgeport conversion with the KNEE as the z axis. There is 2 250lb gas springs under the knee for counterbalance, a 1.5" .2 pitch ballscrew with a custom pedestal/ballnut mount and new bevel gears (now spiral bevel gears). This is peck drilling (G83) a 5" long hole at 12"min feed and 120"min rapid and .2" feed per peck. Who said the knee is not good for the z axis???? I've drilled 3000" worth of holes this week. Thats miles more inches of traveling because it was only .2" pecking. Looks ... |
Popular searches: Cuba, Scuba Diving, Skydiving, Dubai, Niagara Falls, Rainforest, Surfing, Snowboarding, Sandboarding, Pyramids, Everest, Stonehenge, Bear Grylls
