MOORE #3 JIG BORER


Title:
MOORE #3 JIG BORER

Description:
http://www.clevelandmachinery.com/jig/2139.htm MOORE #3 JIG BORER Stock Number: 2139 MOORE #3 Age: 1960 Condition: VERY GOOD Equipped With: 24" x 11" Table Variable Spindle Speeds up to 2500 RPM Spindle Travel: 5" Maximum Distance Spindle to Table: 21" Spindle Feeds: .003" - .005" - .00075" Per Revolution Table Travel: 18" Saddle Travel: 11" Equipped With: (4) End Mill Holders (1) Jacobs Drill Chuck (1) J.T. Taper Holder (1) Micrometer Adjustable Boring Heads (1) Vulcanaire Grinding Head (1) Plain Adjustable Boring Head Machine Work Light (10) Boring Bars Spindle Drive Motor 1/2 HP 2 Speed Wired for 3 phase 60 Cycle 220 Volts Overall Size: 64" FB x 50" LR x 92" H x 4,000 Lbs. Cleveland Machinery Sales, Inc. 5000 Brookpark Road Cleveland, Ohio 44134 Phone: (216) 741-8900 Fax: (216) 741-8995 Email: sales@clevelandmachinery.com http://www.clevelandmachinery.com/

Author:
ClevelandMachinery

Tags:
MOORE, #3, JIG, BORER,

Related Videos:

Plano milling operation
The ram type milling head does heavy, but accurate material removal. 600 mm ram movement within 5 micron accuracy and with it's independent feed system permits accurate deep drilling and boring operation in a Plano mill. In combination with a DRO, you can virtually add jig boring capability to your plano mill. This type converted plano mills are the low cost answer for a all general purpose milling, drilling & boring operation, in single setting. Boring, facing operation in a value housing ...
Jig Grinder
jig grinder
Glass Drill Jig
www.skeelsglass.com www.keithorrblowpipes.com
"248" SERIES BORING HEAD
Wohlhaupter 248 series small diameter boring head in action on long extension. For more information on Wohlhaupter products visit www.wohlhaupterus.com 937-885-1878
American Augers - Auger Boring Machine 72"
Demonstration of Auger Boring Set up and Process
Jacobs #100 Armature Chuck For Metal Lathe
This is a very rare, special purpose, Jacobs Chuck. This is a #100 Jacobs chuck 1/4 to 3/4 its mounted with a #2 Morse taper to a #33jacobs taper arbor with brass/bronze jaws. This is a shaft centering chuck for turning generator and starter armatures that are not drilled for normal centers. The correct name for it is centerless armature turning chuck. Nice piece and not to common as only automotive shops bought them. It is used by having an armature locked in the large Jacobs drill chuck ...
5.12" Kuraki CNC Table Type Horizontal Boring Mill
5.12" Kuraki KBT13CDXA, 40 ATC, X-157", Y-90", 63" x 157" Comb Plain & Rotary Tbl, 2000 RPM, Fanuc 15M, '90 #REF 17630
Williamson Tool & Engineering recent work
Air-bearing sphere grinder
Grinding spherical targets for Lion Precision's spindle error analyzer, using a converted Moore #3 jig-grinder base.
Homemade power table feed for mill drill
a power feed for the table but it is home made. I had this small motor that is built very well with nice roller bearings at each end. It must have come off some high dollar piece of equipment as you can tell just by looking at it. Anyway.......the motor is ac and uses a cap but I have no spec info on it. I made a plate for the motor to bolt to, added a couple gears to reduce drive speed and increase torque. I didn't put a cap on it so it will run either direction. When I turn the drive on it ...
©2009 TripAtlas.com